Antioxidant PLA Composites Containing Lignin for 3D Printing Applications: A Potential Material for Healthcare Applications

• Published in: Pharmaceutics 2019-04, Vol.11 (4), p.165
• Main Authors: Domínguez-Robles, Juan, Martin, Niamh K, Fong, Mun Leon, Stewart, Sarah A, Irwin, Nicola J, Rial-Hermida, María Isabel, Donnelly, Ryan F, Larrañeta, Eneko
• Format: Article
• Language: English
• Subjects: 3-D printers; 3D printing; Additive manufacturing; antioxidant materials; Antioxidants; Biopolymers; Composite materials; Contact angle; fused filament fabrication; Lignin; Oxidative stress; Polymers; Printed materials; Software; Specialty products; wound dressing; Wound healing
• ISSN: 1999-4923; 1999-4923
• DOI: 10.3390/pharmaceutics11040165

Lignin (LIG) is a natural biopolymer with well-known antioxidant capabilities. Accordingly, in the present work, a method to combine LIG with poly(lactic acid) (PLA) for fused filament fabrication applications (FFF) is proposed. For this purpose, PLA pellets were successfully coated with LIG powder and a biocompatible oil (castor oil). The resulting pellets were placed into an extruder at 200 °C. The resulting PLA filaments contained LIG loadings ranging from 0% to 3% ( / ). The obtained filaments were successfully used for FFF applications. The LIG content affected the mechanical and surface properties of the overall material. The inclusion of LIG yielded materials with lower resistance to fracture and higher wettabilities. Moreover, the resulting 3D printed materials showed antioxidant capabilities. By using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) method, the materials were capable of reducing the concentration of this compound up to ca. 80% in 5 h. This radical scavenging activity could be potentially beneficial for healthcare applications, especially for wound care. Accordingly, PLA/LIG were used to design meshes with different designs for wound dressing purposes. A wound healing model compound, curcumin (CUR), was applied in the surface of the mesh and its diffusion was studied. It was observed that the dimensions of the meshes affected the permeation rate of CUR. Accordingly, the design of the mesh could be modified according to the patient's needs.