Multi-Role Surface Modification of Single-Crystalline Nickel-Rich Lithium Nickel Cobalt Manganese Oxides Cathodes with WO3 to Improve Performance for Lithium-Ion Batteries

• Published in: Nanomaterials (Basel, Switzerland) Switzerland), 2022-04, Vol.12 (8), p.1324
• Main Authors: Ou, Limin, Nong, Shengheng, Yang, Ruoxi, Li, Yaoying, Tao, Jinrong, Zhang, Pan, Huang, Haifu, Liang, Xianqing, Lan, Zhiqiang, Liu, Haizhen, Huang, Dan, Guo, Jin, Zhou, Wenzheng
• Format: Article
• Language: English
• Subjects: Cathodes; Chemical elements; Coating effects; Coatings; Cobalt; Cobalt compounds; Crystal structure; Crystallinity; Diffusion rate; Doping; Electric vehicles; Electrode materials; Electrode polarization; Electrodes; Electrolytes; Grain boundaries; Ion diffusion; Lithium; Lithium-ion batteries; Manganese; Manganese oxides; Microscopy; Morphology; Nickel; nickel-rich NCM; Performance enhancement; Polycrystals; Rechargeable batteries; Single crystals; single-crystalline; Spectrum analysis; Structural integrity; Structural stability; surface modification; Synergistic effect; Tungsten; Tungsten oxide; Tungsten oxides; WO3
• ISSN: 2079-4991; 2079-4991
• DOI: 10.3390/nano12081324

Compared with the polycrystalline system, the single-crystalline ternary cathode material has better cycle stability because the only primary particles without grain boundaries effectively alleviate the formation of micro/nanocracks and retain better structural integrity. Therefore, it has received extensive research attention. There is no consistent result whether tungsten oxide acts as doping and/or coating from the surface modification of the polycrystalline system. Meanwhile, there is no report on the surface modification of the single-crystalline system by tungsten oxide. In this paper, multirole surface modification of single-crystalline nickel-rich ternary cathode material LiNi0.6Co0.2Mn0.2O2 by WO3 is studied by a simple method of adding WO3 followed by calcination. The results show that with the change in the amount of WO3 added, single-crystalline nickel-rich ternary cathode material can be separately doped, separately coated, and both doped and coated. Either doping or coating effectively enhances the structural stability, reduces the polarization of the material, and improves the lithium-ion diffusion kinetics, thus improving the cycle stability and rate performance of the battery. Interestingly, both doping and coating (for SC-NCM622-0.5%WO3) do not show a more excellent synergistic effect, while the single coating (for SC-NCM622-1.0%WO3) after eliminating the rock-salt phase layer performs the most excellent modification effect.