Long-Term Investigation into the Membrane Fouling Behavior in Anaerobic Membrane Bioreactors for Municipal Wastewater Treatment Operated at Two Different Temperatures

• Published in: Membranes (Basel) 2020-09, Vol.10 (9), p.231
• Main Authors: Ding, Yi, Guo, Zhansheng, Liang, Zhenlin, Hou, Xuguang, Li, Zhipeng, Mu, Dashuai, Ge, Changzi, Zhang, Chunpeng, Jin, Chao
• Format: Article
• Language: English
• Subjects: anaerobic membrane bioreactor; extracellular polymeric substance; membrane fouling behavior; sludge flocs characteristics; soluble microbial product; temperature
• ISSN: 2077-0375; 2077-0375
• DOI: 10.3390/membranes10090231

In this study, the characteristics of activated sludge flocs were investigated and their effects on the evolution of membrane fouling were considered in the anaerobic membrane bioreactors (AnMBR), which were operated at 25 and 35 °C for municipal wastewater treatment. It was found that the membrane fouling rate of the AnMBR at 25 °C was more severe than that at 35 °C. The membrane fouling trends were not consistent with the change in the concentration of soluble microbial product (SMP). The larger amount of SMP in the AnMBR at 35 °C did not induce more severe membrane fouling than that in the AnMBR at 25 °C. However, the polysaccharide and protein concentration of extracellular polymeric substance (EPS) was higher in the AnMBR at 25 °C in comparison with that in the AnMBR at 35 °C, and the protein/polysaccharide ratio of the EPS in the AnMBR at 25 °C was higher in contrast to that in the AnMBR at 35 °C. Meanwhile, the fouling tendencies measured for the AnMBRs could be related to the characteristics of loosely bound EPS and tightly bound EPS. The analysis of the activated sludge flocs characteristics indicated that a smaller sludge particle size and more fine flocs were observed at the AnMBR with 25 °C. Therefore, the membrane fouling potential in the AnMBR could be explained by the characteristics of activated sludge flocs.