High-Speed Centrifugal Spinning Polymer Slip Mechanism and PEO/PVA Composite Fiber Preparation

• Published in: Nanomaterials (Basel, Switzerland) Switzerland), 2023-04, Vol.13 (7), p.1277
• Main Authors: Ye, Peiyan, Guo, Qinghua, Zhang, Zhiming, Xu, Qiao
• Format: Article
• Language: English
• Subjects: Analysis; centrifugal spinning; Chemical processes; Chemical properties; Composite materials; composite nanofibers; Environmental factors; fiber morphology; Fibers; Flow velocity; Fluids; High speed; Mathematical models; Mechanical properties; Methods; Morphology; Nanofibers; Nanomaterials; Nozzle geometry; Nozzles; Oxides; Polyethylene; Polymers; Polyvinyl alcohol; Scanning electron microscopy; Scanning microscopy; Shear stress; slippage; Structure; Velocity; Velocity distribution; Viscosity; Wall slip
• ISSN: 2079-4991; 2079-4991
• DOI: 10.3390/nano13071277

Composite nanofibers with excellent physical and chemical properties are widely used in new energy, biomedical, environmental, electronic, and other fields. Their preparation methods have been investigated extensively by many experts. High-speed centrifugal spinning is a novel method used to fabricate composite nanofibers. The slip mechanism of polymer solution flows is an important factor affecting the morphology and quality of composite nanofibers prepared by high-speed centrifugal spinning. As the polymer solution flows, the liquid wall slip occurs inside the nozzle, followed by liquid-liquid interface slip and gas-liquid interface slip. The factors affecting polymer slip were investigated by developing a mathematical model in the nozzle. This suggests that the magnitude of the velocity is an important factor that affects polymer slip and determines fiber quality and morphology. Under the same rotational speed, the smaller the nozzle diameter, the greater the concentration of velocity distribution and the smaller the diameter of the produced composite nanofibers. Finally, PEO/PVA composite nanofibers were prepared using high-speed centrifugal spinning equipment at 900-5000 rpm and nozzle diameters of 0.2 mm, 0.4 mm, 0.6 mm, and 0.8 mm. The morphology and quality of the collected PEO/PVA composite nanofibers were analyzed using scanning electron microscopy (SEM) and TG experiments. Then, the optimal parameters for the preparation of PEO/PVA composite nanofibers by high-speed centrifugal spinning were obtained by combining the external environmental factors in the preparation process. Theoretical evaluation and experimental data were provided for the centrifugal composite spinning slip mechanism and for the preparation of composite nanofibers.