Environmental impact assessment of battery boxes based on lightweight material substitution

• Published in: Scientific reports 2024-01, Vol.14 (1), p.2594-2594, Article 2594
• Main Authors: Li, Xinyu, Zhang, Yuanhao, Liao, Yumin, Yu, Guanghai
• Format: Article
• Language: English
• Subjects: 639/166/988; 704/172/4081; Acidification; Aluminum; Aluminum alloys; Climate change; Composite materials; Electric vehicles; Emission measurements; Emissions; Environmental impact; Environmental impact assessment; Global warming; Greenhouse gases; Humanities and Social Sciences; Life cycles; multidisciplinary; Science; Science (multidisciplinary); Sensitivity analysis; Sheet molding compounds; Steel; Toxicity
• ISSN: 2045-2322; 2045-2322
• DOI: 10.1038/s41598-024-53238-2

Power battery is one of the core components of electric vehicles (EVs) and a major contributor to the environmental impact of EVs, and reducing their environmental emissions can help enhance the sustainability of electric vehicles. Based on the principle of stiffness equivalence, the steel case of the power cell is replaced with lightweight materials, a life cycle model is established with the help of GaBi software, and its environmental impact is evaluated using the CML2001 method. The results can be summarized as follows: (1) Based on the four environmental impact categories of GWP, AP, ADP (f), and HTP, which are the global warming potential (GWP), acidification potential (AP), abiotic depletion potential (ADP (f)) and human toxicity potential (HTP), the environmental impact of lightweight materials is lower than that of the steel box. Among them, the aluminum alloy box has the largest reduction, and the Carbon Fiber Sheet Molding Compound (CF-SMC) box is the second. (2) In the sensitivity analysis of electric structure, an aluminum alloy box is still the most preferable choice for environmental impact. (3) In the sensitivity analysis of driving mileage, the aluminum alloy box body is also the best choice for vehicle life. (4) Quantitative assessment using substitution factors measures the decrease in greenhouse gas emissions following the substitution of steel battery box with lightweight materials. The adoption of aluminum alloy battery box can lead to a reduction of 1.55 tons of greenhouse gas emissions, with a substitution factor of 1.55 tC sb −1 . In the case that composite materials have not been recycled commercially on a large scale, aluminum alloy is still one of the best materials for the integrated environmental impact of the whole life cycle of the battery boxes.