High data density and capacity in chipless radiofrequency identification (chipless-RFID) tags based on double-chains of S-shaped split ring resonators (S-SRRs)

• Published in: EPJ applied metamaterials 2017, Vol.4, p.8
• Main Authors: Herrojo, Cristian, Mata-Contreras, Javier, Paredes, Ferran, Martín, Ferran
• Format: Article
• Language: English
• Subjects: Bandwidths; Chain scission; Chains; chipless RFID; coplanar waveguide; Cybersecurity; Figure of merit; high data capacity; Radio frequency; Radio frequency identification; Resonators; security applications; split ring resonators; Tags
• ISSN: 2272-2394; 2272-2394
• DOI: 10.1051/epjam/2017008

The data density per surface (DPS) is a figure of merit in chipless radiofrequency identification (chipless-RFID) tags. In this paper, it is demonstrated that chipless-RFID tags with high DPS can be implemented by using double-chains of S-shaped split ring resonators (S-SRRs). Tag reading is achieved by near-field coupling between the tag and the reader, a CPW transmission line fed by a harmonic signal tuned to the resonance frequency of the S-SRRs. By transversally displacing the tag over the CPW, the transmission coefficient of the line is modulated by tag motion. This effectively modulates the amplitude of the injected (carrier) signal at the output port of the line, and the identification (ID) code, determined by the presence or absence of S-SRRs at predefined and equidistant positions in the chains, is contained in the envelope function. The DPS is determined by S-SRR dimensions and by the distance between S-SRRs in the chains. However, by using two chains of S-SRRs, the number of bits per unit length that can be accommodated is very high. This chipless-RFID system is of special interest in applications where the reading distance can be sacrificed in favor of data capacity (e.g., security and authentication). Encoding of corporate documents, ballots, exams, etc., by directly printing the proposed tags on the item product to prevent counterfeiting is envisaged.