Analysis of Woven Fabric at the Place of the Sewn Seam

• Published in: AUTEX Research Journal 2018-09, Vol.18 (3), p.216-220
• Main Authors: Rogina-Car, Beti, Schwarz, Ivana, Kovačević, Stana
• Format: Article
• Language: English
• Subjects: loading; Materials science; Mechanical properties; sewn seam; Textiles; wool/polyester woven fabric
• ISSN: 2300-0929; 1470-9589; 2300-0929
• DOI: 10.1515/aut-2017-0022

Key importance and the role of sewn seam in the woven fabric are presented. Fabric properties in the places joined with the sewn seam on which garment durability, applicability, appearance and quality depend are highlighted. Seam location is usually the weakest spot on the garment, especially when the great loads are present at these places. Mechanical properties of the sewn fabrics were investigated in different test conditions. The influence of the load on the sewn seam is analyzed in time intervals. Sample with seam have approximately 70% lower breaking properties (breaking force and elongation at break) than the sample without seam. By preloading the seam fabrics with 30%, 50% and 70% of elongation at break, for a 3-h period, the effect on mechanical properties were tested and the differences in pre-stretching intensity were observed. By conducting such test, it is expected that the fabric experience further degradation and that breaking properties further reduce, but the exact opposite occurred (breaking properties, by increasing the preload, increase even more), because of various material properties (structural fabric properties, raw material characteristics, seam characteristics).