Effect of the Percentage of MUF Adhesive Coverage on Shear Strength When Bonding Different Wood Species

Due to climate changes, it is necessary to consider the use of other wood species to replace currently used woods. This work deals with the determination of the shear strength of bonded veneers (eight European wood species: spruce, larch, pine, beech, oak, poplar, birch, and alder) with Silekol® 311...

Full description

Saved in:
Bibliographic Details
Published in:Bioresources 2024-07, Vol.19 (3), p.5672-5684
Main Authors: Marek Nociar, Tomáš Pipíška, Pavel Král, Samo Grbec, Milan Šernek
Format: Article
Language:English
Subjects:
automated bonding evaluation system (abes)
lap shear strength
melamine-urea-formaldehyde adhesive
percentage of adhesive coverage
strand boards
wood-based panels
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Due to climate changes, it is necessary to consider the use of other wood species to replace currently used woods. This work deals with the determination of the shear strength of bonded veneers (eight European wood species: spruce, larch, pine, beech, oak, poplar, birch, and alder) with Silekol® 311 melamine-urea-formaldehyde adhesive (MUF) with a variable coverage on the surface of the samples: 10, 15, 20, 25, 30, 50, 75, and 100%. The Automated Bonding Evaluation System (ABES) was used to evaluate and compare adhesive bond strengths. The larch, beech, and oak samples exhibited greater single-lap shear strength than the control samples from spruce. There was no statistically significant difference in shear strength regarding the adhesive coverage from 100% to 20% on the surface of the samples, for almost all wood species. The results of the project provide basic information about the bonding strengths with different coverage in the adhesive layer, comparing non-commonly used wood species in wood-based composites such as oriented strand board and particleboard.
ISSN:1930-2126