The Study of Structural Optimization on Hydraulic Performance and Anti-Clogging Performance of Labyrinth Drip Irrigation Emitters

• Published in: Agronomy (Basel) 2023-10, Vol.13 (10), p.2496
• Main Authors: Xu, Tianyu, Bao, Sanlin, Li, Zonglei, Yu, Qiuyue, Zheng, Ennan
• Format: Article
• Language: English
• Subjects: Analysis; Atmospheric pressure; Computational fluid dynamics; Discrete element method; Drip irrigation; drip irrigation emitter; Dynamic structural analysis; Emitters; Energy loss; Flow channels; Flow index; Fluid dynamics; Hydraulics; Hydrodynamics; Impurities; Indicators; Irrigation; Irrigation efficiency; Irrigation systems; Irrigation water; Mathematical models; Numerical analysis; Optimization; percentage decrease in velocity; Sand; Sand & gravel; sand passage rate; Simulation; Simulation methods; structure parameters; Turbulence models; Velocity
• ISSN: 2073-4395; 2073-4395
• DOI: 10.3390/agronomy13102496

The core component of a properly functioning drip irrigation system is the drip irrigation emitter. Irrigation water containing impurities and sand particles can easily lead to clogging of the drip irrigation emitter, reducing the efficiency of the drip irrigation system. In this paper, orthogonal tests were used to optimize the flow channel structure, combined with the computational fluid dynamics–discrete element method (CFD-DEM) to analyze the flow index and sand particle motion characteristics. Clear water tests and short-cycle anticlogging tests were used to validate the results of the numerical simulation, and the relationship between the hydraulic performance and anti-clogging performance was revealed via linear regression. The results showed that the structural parameters of drip irrigation emitters were important factors affecting the flow index and sand movement characteristics. The order from largest to smallest was the turning angle, amount of interdental reference, flow channel depth, flow channel width, and width of the top base. The sand passage rate and the percentage decrease in velocity can be used as important indicators of anti-clogging performance, and there was a negative correlation between the two indicators. The flow channel with a 65° turning angle had the lowest flow index, and the sand passage rate can reach up to 91.48%; the reason was that the main flow region velocity was higher, the vortex region and the sand energy loss were small, which was not easy to clog. The equation for the relationship between flow index and sand passage rate was a negative correlation for drip irrigation emitters between a 65° and 75° turning angle. The drip irrigation emitter with a 65° turning angle had better hydraulic performance and anti-clogging performance.