Low pass and quad band pass tunable filter based on stub resonator technique

• Published in: Jordanian journal of computers and information technology (Online) 2019-08, Vol.5 (2), p.122-134
• Main Authors: Smadi, Lina, Sharif, Hanan, Fauri, Yanal S., Jamlih, Hani
• Format: Article
• Language: ara ; eng
• Subjects: Bandpass filter; Bandwidth; Bandwidths; Circuits; Computer engineering; Design; Diodes; External quality factor; Group delay; Low pass filter; Multiple passbands; Mutual coupling; Reflection coefficient; Transmission coefficient; Tunable filter; Varactor diode
• ISSN: 2413-9351; 2415-1076
• DOI: 10.5455/jjcit.71-1557923217

An electronically tunable multi-passband filter using one varactor diode is implemented based on transmission line stub method for passing several most favourable applications through multiple operating bands. In this paper, the filter is designed on Rogers RT/Duroid 5880-substrate and its input and output ports are terminated by 50 Ω microstrip feed line. The filter passbands consist of low pass filter (LPF) with tunable cut-off frequency which can reach 0.94 GHz, then several tunable bandpass filters (BPFs) that can cover the following frequency ranges BPF1 (1.94 – 3.33 GHz), BPF2 (3.83 – 4.23 GHz), BPF3 (4.53 – 5.56 GHz) and BPF4 (6.83 – 7.48 GHz) with insertion loss (IL) of |S21| ≤ 3 dB. The designed filter is the binomial type with 3 elements that are implemented in three shunt stubs with the middle stub being shorted. A parametric study was conducted for the optimum location of the varactor diode and an external DC biasing circuit introduced to produce the required reverse biasing for the varactor diode and its effect was considered. The demonstrated filter is investigated using the high-frequency structure simulator (HFSS). The measured scattering parameters’ S11 (reflection coefficient) and S21 (transmission coefficient) results show good agreement with the simulated values.