A study on the effect of flat plate friction resistance on speed performance prediction of full scale

• Published in: International journal of naval architecture and ocean engineering 2015-01, Vol.7 (1), p.195-211
• Main Author: Park, Dong-Woo
• Format: Article
• Language: English
• Subjects: Flat plate friction; Form factor Scale effect; Friction resistance curve; ITTC-1957
• ISSN: 2092-6782; 2092-6790
• DOI: 10.2478/IJNAOE-2015-0014

Flat plate friction lines have been used in the process to estimate speed performance of full-scale ships in model tests. The results of the previous studies showed considerable differences in determining form factors depending on changes in plate friction lines and Reynolds numbers. These differences had a great influence on estimation of speed performance of full-scale ships. This study was conducted in two parts. In the first part, the scale effect of the form factor depending on change in the Reynolds number was studied based on CFD, in connection with three kinds of friction resistance curves: the ITTC-1957, the curve proposed by Grigson (1993; 1996), and the curve developed by Katsui et al. (2005). In the second part, change in the form factor by three kinds of friction resistance curves was investtigated based on model tests, and then the brake power and the revolution that were finally determined by expansion processes of full-scale ships. When three kinds of friction resistance curves were applied to each kind of ships, these were investigated: differences between resistance and self-propulsion components induced in the expansion processes of full-scale ships, correlation of effects between these components, and tendency of each kind of ships. Finally, what friction resistance curve was well consistent with results of test operation was examined per each kind of ships.