Development of Novel Antibacterial Ti-Nb-Ga Alloys with Low Stiffness for Medical Implant Applications

• Published in: Journal of functional biomaterials 2024-06, Vol.15 (6), p.167
• Main Authors: McHendrie, Rhianna, Nguyen, Ngoc Huu, Nguyen, Manh Tuong, Fallahnezhad, Khosro, Vasilev, Krasimir, Truong, Vi Khanh, Hashemi, Reza
• Format: Article
• Language: English
• Subjects: Actin; Alloy development; Alloys; Antibacterial agents; antibacterial biomaterials; Antimicrobial activity; Bacteria; Beta phase; Biocompatibility; Biomaterials; Biomedical materials; Bone biomaterials; Bone implants; Cell lines; Cell morphology; Cellular structure; Contact stresses; Corrosion resistance; Cortical bone; Cytology; Cytoskeleton; Cytotoxicity; Design; Diamonds; Gallium; Gram-negative bacteria; Gram-positive bacteria; Implants, Artificial; Infections; Light microscopy; Mechanical properties; medical implants; Microhardness; Microscopy; Microstructure; Modulus of elasticity; Morphology; Muscle proteins; Nanoindentation; Niobium; Optical microscopy; Orthopaedic implants; Orthopedics; Prosthesis; Scanning electron microscopy; Sensors; Specialty metals industry; Spectroscopy; Stiffness; Stress shielding; Surgical implants; Titanium; Titanium alloys; Titanium base alloys; Transplants & implants
• ISSN: 2079-4983; 2079-4983
• DOI: 10.3390/jfb15060167

With the rising demand for medical implants and the dominance of implant-associated failures including infections, extensive research has been prompted into the development of novel biomaterials that can offer desirable characteristics. This study develops and evaluates new titanium-based alloys containing gallium additions with the aim of offering beneficial antibacterial properties while having a reduced stiffness level to minimise the effect of stress shielding when in contact with bone. The focus is on the microstructure, mechanical properties, antimicrobial activity, and cytocompatibility to inform the suitability of the designed alloys as biometals. Novel Ti-33Nb-xGa alloys (x = 3, 5 wt%) were produced via casting followed by homogenisation treatment, where all results were compared to the currently employed alloy Ti-6Al-4V. Optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) results depicted a single beta (β) phase microstructure in both Ga-containing alloys, where Ti-33Nb-5Ga was also dominated by dendritic alpha (α) phase grains in a β-phase matrix. EDS analysis indicated that the α-phase dendrites in Ti-33Nb-5Ga were enriched with titanium, while the β-phase was richer in niobium and gallium elements. Mechanical properties were measured using nanoindentation and microhardness methods, where the Young's modulus for Ti-33Nb-3Ga and Ti-33Nb-5Ga was found to be 75.4 ± 2.4 and 67.2 ± 1.6 GPa, respectively, a significant reduction of 37% and 44% with respect to Ti-6Al-4V. This reduction helps address the disproportionate Young's modulus between titanium implant components and cortical bone. Importantly, both alloys successfully achieved superior antimicrobial properties against Gram-negative and Gram-positive bacteria. Antibacterial efficacy was noted at up to 90 ± 5% for the 3 wt% alloy and 95 ± 3% for the 5 wt% alloy. These findings signify a substantial enhancement of the antimicrobial performance when compared to Ti-6Al-4V which exhibited very small rates (up to 6.3 ± 1.5%). No cytotoxicity was observed in hGF cell lines over 24 h. Cell morphology and cytoskeleton distribution appeared to depict typical morphology with a prominent nucleus, elongated fibroblastic spindle-shaped morphology, and F-actin filamentous stress fibres in a well-defined structure of parallel bundles along the cellular axis. The developed alloys in this work have shown very promising results and are suggested to be further examined