Mechanical Behavior of Hydroxyapatite-Chitosan Composite: Effect of Processing Parameters

• Published in: Minerals (Basel) 2021-02, Vol.11 (2), p.213-10
• Main Authors: Said, Hamid Ait, Noukrati, Hassan, Ben Youcef, Hicham, Bayoussef, Ayoub, Oudadesse, Hassane, Barroug, Allal
• Format: Article
• Language: English
• Subjects: bone repair; Chemical Sciences; chitosan; composite; hydroxyapatite; mechanical strength
• ISSN: 2075-163X; 2075-163X
• DOI: 10.3390/min11020213

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.