Structural Behavior of Full-Scale Novel Hybrid Layered Concrete Slabs Reinforced with CFRP and Steel Grids under Impact Load

• Published in: Buildings (Basel) 2024-09, Vol.14 (9), p.2625
• Main Authors: Abu Altemen, Ahmed Abbas Ghali, Medhlom, Mu’taz Kadhim, Özakça, Mustafa
• Format: Article
• Language: English
• Subjects: Bottom casting; Carbon fiber reinforced concretes; Carbon fiber reinforced plastics; carbon-fiber-reinforced polymer reinforcement; Composite materials; Concrete; Concrete slabs; Cracks; drop-weight impact; Failure; Fiber composites; Fiber reinforced polymers; Height; Impact analysis; Impact loads; Impact resistance; Impact response; Impact strength; Impact tests; Investigations; layered concrete; Load tests; Mechanical properties; Nuclear power plants; Polymers; Projectiles; reactive powder concrete; Reinforced concrete; Reinforcing steels; Researchers; Slabs; Steel; Structural behavior; Ultra high performance concrete
• ISSN: 2075-5309; 2075-5309
• DOI: 10.3390/buildings14092625

Reinforced concrete two-way slabs are important elements in the construction field, and their impact response under drop-weight impact is a complex mechanical issue that can cause the collapse of heavy structures. Previous research has documented the analysis of conventional steel-reinforced concrete slabs under impact loads. However, the investigation of layered hybrid concrete composite flat solid slabs reinforced with carbon-fiber-reinforced polymer (CFRP) rebars is an innovative subject. This paper examines the structural behavior of layered novel hybrid concrete composite flat solid slabs with a combination of reactive powder concrete (RPC) in the top layer and normal concrete (NC) in the bottom layer, reinforced with internal CFRP or traditional steel bars in the tension zone, under an impact load test. For this purpose, ten full-scale square flat solid slab samples with a 1550 mm length and a 150 mm depth were fabricated and divided into eight layered hybrid concrete samples with 50% RPC and 50% NC and two samples cast with NC only. The impact tests were carried out using a hardened steel cylindroconical impactor (projectile) with a height of 650 mm and a diameter of 200 mm, a flat nose diameter of 90 mm, and a total mass of 150 kg released from two different heights of 5 and 7 m. The variables considered were the types and ratios of reinforcement, as well as the free-drop weight and height. The experimental results obtained showed that layered RPC flat solid slabs are superior in resisting and sustaining impact forces and also have fewer scattered parts when compared to NC flat solid slabs. Additionally, the flat solid slab samples reinforced with CFRP bar grids were overall more resistant to impact loads, by an average of 19%, compared to flat solid slabs with steel bars and showed lower deflection, by an average of 10%, compared to the other flat solid slabs.