Synthesis, Characterization, and Applications of Silver Nano Fibers in Humidity, Ammonia, and Temperature Sensing

• Published in: Micromachines (Basel) 2021-06, Vol.12 (6), p.682
• Main Authors: Rashid, Haroon-Ur, Ali, Muhammad, Sarker, Mahidur R, Md Ali, Sawal Hamid, Akhtar, Naseem, Khan, Nadir Ali, Asif, Muhammad, Shah, Sahar
• Format: Article
• Language: English
• Subjects: Aluminum; Ammonia; Electrical properties; Fourier transforms; Gases; Humidity; Laboratories; Mass production; Nanofibers; Nanoparticles; Nanowires; Polyvinyl alcohol; Power supply; Relative humidity; Scanning electron microscopy; Sensors; silver nanoparticles; Software; Spectrum analysis; Synthesis; temperature sensor
• ISSN: 2072-666X; 2072-666X
• DOI: 10.3390/mi12060682

The promising chemical, mechanical, and electrical properties of silver from nano scale to bulk level make it useful to be used in a variety of applications in the biomedical and electronic fields. Recently, several methods have been proposed and applied for the small-scale and mass production of silver in the form of nanoparticles, nanowires, and nanofibers. In this research, we have proposed a novel method for the fabrication of silver nano fibers (AgNFs) that is environmentally friendly and can be easily deployed for large-scale production. Moreover, the proposed technique is easy for device fabrication in different applications. To validate the properties, the synthesized silver nanofibers have been examined through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, the synthesized silver nanofibers have been deposited over sensors for Relative humidity (RH), Ammonia (NH ), and temperature sensing applications. The sensor was of a resistive type, and found 4.3 kΩ for relative humidity (RH %) 30-90%, 400 kΩ for NH (40,000 ppm), and 5 MΩ for temperature sensing (69 °C). The durability and speed of the sensor verified through repetitive, response, and recovery tests of the sensor in a humidity and gas chamber. It was observed that the sensor took 13 s to respond, 27 s to measure the maximum value, and took 33 s to regain its minimum value. Furthermore, it was observed that at lower frequencies and higher concentration of NH , the response of the device was excellent. Furthermore, the device has linear and repetitive responses, is cost-effective, and is easy to fabricate.