Effect of Various Finishing Procedures on the Reflectivity (Shine) of Tooth Enamel - An In-vitro Study

• Published in: Journal of clinical and diagnostic research 2016-08, Vol.10 (8), p.ZC22-ZC27
• Main Authors: Patil, Harshal Ashok, Chitko, Shrikant Shrinivas, Kerudi, Veerendra Virupaxappa, Maheshwari, Amit Ratanlal, Patil, Neeraj Suresh, Tekale, Pawankumar Dnyandeo, Gore, Ketan Ashorao, Zope, Amit Ashok
• Format: Article
• Language: English
• Subjects: custom made reflectometer; Dentistry Section; gloss; reflection
• ISSN: 2249-782X; 0973-709X
• DOI: 10.7860/JCDR/2016/18921.8234

Reflectivity of an object is a good parameter for surface finish. As the patient evaluates finishing as a function of gloss/reflectivity/shine an attempt is made here to evaluate changes in surface finish with custom made reflectometer. The aim of the present study was to study the effect of various procedures during orthodontic treatment on the shine of enamel, using a custom made reflectometer. Sixty one extracted premolars were collected and each tooth was mounted on acrylic block. Reflectivity of the teeth was measured as compared to standard before any procedure. One tooth was kept as standard throughout the study. Sixty teeth were acid etched. Reflectivity was measured on custom made reflectometer and readings recorded. Same procedure was repeated after debonding. Then 60 samples were divided into three groups: Group 1 - Tungsten Carbide, Group 2 - Astropol, Group 3- Sof-Lex disc depending upon the finishing method after debonding and reflectivity was measured. The mean percentage of reflectivity after acid etching was 31.4%, debonding 45.5%, Tungsten carbide bur finishing (Group 1) was 58.3%, Astropol (Group 2) 72.8%, and Sof-Lex disc (Group 3) 84.4% as that to the standard. There was statistically very highly significant (p Group 2> Group 1. The primary goal was to restore the enamel to its original state after orthodontic treatment. The methods tested in this study could not restore the original enamel reflectivity.