Three-Coil Wireless Charging System Based on S-PS Topology

• Published in: Energies (Basel) 2024-08, Vol.17 (15), p.3606
• Main Authors: Yan, Kai, Dang, Ruirong, Wang, Wenzhen
• Format: Article
• Language: English
• Subjects: auxiliary clamp coil; Battery chargers; battery charging; constant current and constant voltage output mode conversion; constant current output (CC); constant voltage output (CV); Design; Efficiency; induced power output (IPT); Interoperability; Lithium; Load; Systems design; Systems stability; Ultrasonic transducers
• ISSN: 1996-1073; 1996-1073
• DOI: 10.3390/en17153606

To protect the battery, radio energy transmission charging typically uses constant current (CC) charging before switching to constant voltage (CV) charging to enhance battery durability. This paper proposes adding an auxiliary clamp coil to the original circuit topology. The IPT battery charger designed with the auxiliary clamp coil can achieve both constant current (CC) and constant voltage (CV) outputs. The mutual inductance between the auxiliary clamp coil and the primary side coil greatly influences the output performance of the entire IPT system, so the auxiliary clamp coil should not be too large. To solve this problem, an S-S-PS circuit with secondary compensation topology in the secondary coil is proposed. This circuit topology reduces the size of the auxiliary clamp coil, allowing it to be placed in an optimal position. When the constant voltage output critical position is reached, the IPT system can still automatically, continuously, and smoothly switch between CC and CV modes. Consequently, this approach avoids increased cost consumption associated with detecting CC-CV switching thresholds, adding wireless transmission communication modules, real-time control of the power transmitter, and active protection of the circuit during constant current charging. Finally, a 48 V/2.5 A prototype was built to verify that the IPT system has CC-CV conversion functionality.