Supported Molybdenum Carbide and Nitride Catalysts for Carbon Dioxide Hydrogenation

• Published in: Frontiers in chemistry 2020-06, Vol.8, p.452-452
• Main Authors: Abou Hamdan, Marwa, Nassereddine, Abdallah, Checa, Ruben, Jahjah, Mohamad, Pinel, Catherine, Piccolo, Laurent, Perret, Noémie
• Format: Article
• Language: English
• Subjects: carbide; Catalysis; Chemical Sciences; Chemistry; CO2 hydrogenation; nitride; supported catalysts; TiO2; ZrO2
• ISSN: 2296-2646; 2296-2646
• DOI: 10.3389/fchem.2020.00452

Catalysts based on molybdenum carbide or nitride nanoparticles (2–5 nm) supported on titania were prepared by wet impregnation followed by a thermal treatment under alkane (methane or ethane)/hydrogen or nitrogen/hydrogen mixture, respectively. The samples were characterized by elemental analysis, volumetric adsorption of nitrogen, X-ray diffraction, and aberration-corrected transmission electron microscopy. They were evaluated for the hydrogenation of CO2 in the 2–3 MPa and 200–300°C ranges using a gas-phase flow fixed bed reactor. CO, methane, methanol, and ethane (in fraction-decreasing order) were formed on carbides, whereas CO, methanol, and methane were formed on nitrides. The carbide and nitride phase stoichiometries were tuned by varying the preparation conditions, leading to C/Mo and N/Mo atomic ratios of 0.2–1.8 and 0.5–0.7, respectively. The carbide activity increased for lower carburizing alkane concentration and temperature, i.e., lower C/Mo ratio. Enhanced carbide performances were obtained with pure anatase titania support as compared to P25 (anatase/rutile) titania or zirconia, with a methanol selectivity up to 11% at 250°C. The nitride catalysts appeared less active but reached a methanol selectivity of 16% at 250°C.CO(2)hydrogenation