Selective Etching of Si versus Si[sub.1−x]Ge[sub.x] in Tetramethyl Ammonium Hydroxide Solutions with Surfactant

• Published in: Materials 2022-10, Vol.15 (19)
• Main Authors: Choi, Yongjoon, Cho, Choonghee, Yoon, Dongmin, Kang, Joosung, Kim, Jihye, Kim, So Young, Suh, Dong Chan, Ko, Dae-Hong
• Format: Article
• Language: English
• Subjects: Hydroxides; Surface active agents
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma15196918

We investigated the selective etching of Si versus Si[sub.1−x]Ge[sub.x] with various Ge concentrations (x = 0.13, 0.21, 0.30, 0.44) in tetramethyl ammonium hydroxide (TMAH) solution. Our results show that the Si[sub.1−x]Ge[sub.x] with a higher Ge concentration was etched slower due to the reduction in the Si(Ge)-OH bond. Owing to the difference in the etching rate, Si was selectively etched in the Si[sub.0.7]Ge[sub.0.3]/Si/Si[sub.0.7]Ge[sub.0.3] multi-layer. The etching rate of Si depends on the Si surface orientation, as TMAH is an anisotropic etchant. The (111) and (010) facets were formed in TMAH, when Si was laterally etched in the and directions in the multi-layer, respectively. We also investigated the effect of the addition of Triton X-100 in TMAH on the wet etching process. Our results confirmed that the presence of 0.1 vol% Triton reduced the roughness of the etched Si and Si[sub.1−x]Ge[sub.x] surfaces. Moreover, the addition of Triton to TMAH could change the facet formation from (010) to (011) during Si etching in the -direction. The facet change could reduce the lateral etching rate of Si and consequently reduce selectivity. The decrease in the layer thickness also reduced the lateral Si etching rate in the multi-layer.