Use of waste marble powder in brick industry

• Published in: Construction & building materials 2012-04, Vol.29 (1), p.449-457
• Main Authors: Bilgin, N., Yeprem, H.A., Arslan, S., Bilgin, A., Günay, E., Marşoglu, M.
• Format: Article
• Language: English
• Subjects: Brick mortar; Building; Calcite; Calcite crystals; Carbonate minerals; Carbonates; Cement; Clay; Clay minerals; Construction industry; Crystals; Environmental concerns; Hematite; Mechanical properties; Montmorillonite; Natural stone; Physico-mechanical properties; Polymer industry; Porosity; Powders; Production processes; Recycling (Waste, etc.); Silicates; Sintering; Soil-cement construction; Structure; Waste management; Waste marble powder
• ISSN: 0950-0618; 1879-0526
• DOI: 10.1016/j.conbuildmat.2011.10.011

▸ Marble wastes were collected from marble deposits. ▸ Mixture were prepared for various processes of industrial brick investigation. ▸ Physico-mechanical properties of the samples were studied. ▸ Prepared sample prisms were pressed and sintered temperatures 900, 1000 and 1100°C. The usability of waste marble dust as an additive material in industrial brick were investigated. Marble wastes were collected from marble deposits which are located at Southwest of Turkey and industrial brick mortar was obtained from a brick company in Istanbul. Waste marble dust and brick mortar were prepared for various processes of industrial brick investigation. Waste material in different proportions was mixed with industrial brick mortar starting amount of 0wt.% up to 80wt.%. in 41×8×8mm rectangular prisms for testing of physico-mechanical properties of the samples having different marble dust composition. These prepared prisms were pressed and sintered at three different temperatures 900, 1000 and 1100°C. Flexural strengths of the test samples were given at three different temperature values of 900, 1000 and 1100°C. Archimedes water displacement test was conducted with different water absorption percentage values at 900, 1000 and 1100°C temperatures. XRD analyses have been carried out for the additives which contain mainly calcite and small amount of dolomite minerals. It was found that the amount of marble dust additive had positive effect on the physical, chemical and mechanical strength of the produced industrial brick. With increasing demands of the construction industry, bricks quality and cost become more important day by day in Turkey. In addition, the usage of marble wastes for the production of industrial bricks has significant important role on the recycling waste marble powder in the brick production along with a great contributions to economy and ecology of the country.