GPS-based sea level measurements to help the characterization of land contamination in coastal areas

• Published in: Advances in space research 2013-04, Vol.51 (8), p.1383-1399
• Main Authors: Bonnefond, P., Exertier, P., Laurain, O., Thibaut, P., Mercier, F.
• Format: Article
• Language: English
• Subjects: Altimeter calibration; Altimeter waveform; Earth Sciences; GPS; Sciences of the Universe; Tide gauges; Wet tropospheric correction
• ISSN: 0273-1177; 1879-1948
• DOI: 10.1016/j.asr.2012.07.007

The Corsica site has been established in 1996 to perform altimeter calibration on TOPEX/Poseidon and then on its successors Jason-1 and Jason-2. The first chosen location was under the #85 ground track that overflight the Senetosa Cape. In 2005, it was decided to develop another location close to Ajaccio, to be able to perform the calibration of Envisat and in a next future of SARAL/AltiKa that will flight over the same ground tracks. Equipped with various instruments (tide gauges, permanent GPS, GPS buoy, weather station…) the Corsica calibration site is able to quantify the altimeter Sea Surface Height bias but also to give an input on the origin of this bias (range, corrections, orbits, …). Due to the size of Corsica (not a tiny island), the altimeter measurement system (range and corrections) can be contaminated by land. The aim of this paper is to evaluate this land contamination by using GPS measurements from a fixed receiver on land and from another receiver onboard a life buoy. Concerning the altimeter land contamination, we have quantify that this effect can reach 8mm/km and then affects the Sea Surface Height bias values already published in the framework of the Corsica calibration site by 5–8mm for TOPEX and Jason missions. On the other hand, the radiometer measurements (wet troposphere correction) are also sensitive to land and we have been able to quantify the level of improvement of a dedicated coastal algorithm that reconciles our results with those coming from other calibration sites. Finally, we have also shown that the standard deviation of the GPS buoy sea level measurements is highly correlated (∼87%) with the Significant Wave Height derived from the altimeters and can be used to validate such parameter.