Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes

• Published in: Applied composite materials 2018-06, Vol.25 (3), p.569-588
• Main Authors: El Moumen, A., Tarfaoui, M., Lafdi, K.
• Format: Article
• Language: English
• Subjects: Carbon fiber reinforced plastics; Carbon fibers; Carbon nanotubes; Carbon-epoxy composites; Characterization and Evaluation of Materials; Chemistry and Materials Science; Classical Mechanics; Elastic properties; Engineering Sciences; Finite element method; Homogenization; Industrial Chemistry/Chemical Engineering; Materials; Materials Science; Mathematical models; Mechanical properties; Mechanics; Military applications; Multiscale analysis; Nanotubes; Numerical prediction; Periodic variations; Polymer matrix composites; Polymer Sciences; Textile composites; Thin films; Unit cell; Weaving
• ISSN: 0929-189X; 1573-4897
• DOI: 10.1007/s10443-017-9636-2

Elastic properties of laminate composites based Carbone Nanotubes (CNTs), used in military applications, were estimated using homogenization techniques and compared to the experimental data. The composite consists of three phases: T300 6k carbon fibers fabric with 5HS (satin) weave, baseline pure Epoxy matrix and CNTs added with 0.5%, 1%, 2% and 4%. Two step homogenization methods based RVE model were employed. The objective of this paper is to determine the elastic properties of structure starting from the knowledge of those of constituents (CNTs, Epoxy and carbon fibers fabric). It is assumed that the composites have a geometric periodicity and the homogenization model can be represented by a representative volume element (RVE). For multi-scale analysis, finite element modeling of unit cell based two step homogenization method is used. The first step gives the properties of thin film made of epoxy and CNTs and the second is used for homogenization of laminate composite. The fabric unit cell is chosen using a set of microscopic observation and then identified by its ability to enclose the characteristic periodic repeat in the fabric weave. The unit cell model of 5-Harness satin weave fabric textile composite is identified for numerical approach and their dimensions are chosen based on some microstructural measurements. Finally, a good comparison was obtained between the predicted elastic properties using numerical homogenization approach and the obtained experimental data with experimental tests.