Effect of grain orientation and magnesium doping on β-tricalcium phosphate resorption behavior

• Published in: Acta biomaterialia 2019-04, Vol.89, p.391-402
• Main Authors: Gallo, Marta, Le Gars Santoni, Bastien, Douillard, Thierry, Zhang, Fei, Gremillard, Laurent, Dolder, Silvia, Hofstetter, Willy, Meille, Sylvain, Bohner, Marc, Chevalier, Jérôme, Tadier, Solène
• Format: Article
• Language: English
• Subjects: Acids; Animals; Bioceramics; Biocompatibility; Bioengineering; Biomaterials; Biomedical materials; Bone biomaterials; Bone grafts; Bone resorption; Bone Resorption - metabolism; Bone Resorption - pathology; Calcium; Calcium phosphate; Calcium phosphates; Calcium Phosphates - chemistry; Calcium Phosphates - pharmacokinetics; Calcium Phosphates - pharmacology; Cell culture; Crystal lattices; Crystal orientation; Crystal structure; Crystallinity; Design optimization; Dissolution; Dissolution behavior; Doping; Electron backscatter diffraction; Electron backscatter diffraction (EBSD); Engineering Sciences; Environmental conditions; Etching; Grafting; Grain orientation; Inductively coupled plasma mass spectrometry; Kinetics; Lattice parameters; Life Sciences; Magnesium; Magnesium - chemistry; Magnesium - pharmacokinetics; Magnesium - pharmacology; Mass Spectrometry; Mass spectroscopy; Materials; Mice; Microscopy, Electron, Scanning; Orientation effects; Osteoclastic resorption; Osteoclasts; Osteoclasts - metabolism; Osteoclasts - ultrastructure; Scanning electron microscopy; Substitute bone; Surgical implants; Tricalcium phosphate; X-Ray Diffraction
• ISSN: 1742-7061; 1878-7568
• DOI: 10.1016/j.actbio.2019.02.045

[Display omitted] The efficiency of calcium phosphate (CaP) bone substitutes can be improved by tuning their resorption rate. The influence of both crystal orientation and ion doping on resorption is here investigated for beta-tricalcium phosphate (β-TCP). Non-doped and Mg-doped (1 and 6 mol%) sintered β-TCP samples were immersed in acidic solution (pH 4.4) to mimic the environmental conditions found underneath active osteoclasts. The surfaces of β-TCP samples were observed after acid-etching and compared to surfaces after osteoclastic resorption assays. β-TCP grains exhibited similar patterns with characteristic intra-crystalline pillars after acid-etching and after cell-mediated resorption. Electron BackScatter Diffraction analyses, coupled with Scanning Electron Microscopy, Inductively Coupled Plasma–Mass Spectrometry and X-Ray Diffraction, demonstrated the influence of both grain orientation and doping on the process and kinetics of resorption. Grains with c-axis nearly perpendicular to the surface were preferentially etched in non-doped β-TCP samples, whereas all grains with simple axis (a, b or c) nearly normal to the surface were etched in 6 mol% Mg-doped samples. In addition, both the dissolution rate and the percentage of etched surface were lower in Mg-doped specimens. Finally, the alignment direction of the intra-crystalline pillars was correlated with the preferential direction for dissolution. The present work focuses on the resorption behavior of calcium phosphate bioceramics. A simple and cost-effective alternative to osteoclast culture was implemented to identify which material features drive resorption. For the first time, it was demonstrated that crystal orientation, measured by Electron Backscatter Diffraction, is the discriminating factor between grains, which resorbed first, and grains, which resorbed slower. It also elucidated how resorption kinetics can be tuned by doping β-tricalcium phosphate with ions of interest. Doping with magnesium impacted lattice parameters. Therefore, the crystal orientations, which preferentially resorbed, changed, explaining the solubility decrease. These important findings pave the way for the design of optimized bone graft substitutes with tailored resorption kinetics.