Wooden furniture wastes as pore formers in fired clay bricks: mechanical properties and environmental emissions

In the present work, wooden furniture wastes were used as pore-forming agents for the manufacture of fired clay bricks. The main objectives of this study are (i) to investigate the impact of adding wooden furniture wastes into the clay body on the mechanical properties and (ii) to identify gas emiss...

Full description

Saved in:
Bibliographic Details
Published in:Clean technologies and environmental policy 2023-04, Vol.25 (3), p.879-888
Main Authors: Abjaghou, H., Bourret, J., Tessier-Doyen, N., Quint, V., Smith, A., Smith, D. S., Peyratout, C. S.
Format: Article
Language:English
Subjects:
Bricks
Chemical composition
Chemical Sciences
Clay
Earth and Environmental Science
Emissions
Environment
Environmental Economics
Environmental Engineering/Biotechnology
Environmental policy
Furniture
Furniture industry
Gases
Hazardous wastes
Industrial and Production Engineering
Industrial Chemistry/Chemical Engineering
Masonry
Mechanical properties
Original Paper
Particle board
Pore formation
Property
Reagents
Sawdust
Sustainable Development
Wastes
Wood waste
Citations: Items that this one cites
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In the present work, wooden furniture wastes were used as pore-forming agents for the manufacture of fired clay bricks. The main objectives of this study are (i) to investigate the impact of adding wooden furniture wastes into the clay body on the mechanical properties and (ii) to identify gas emissions during the firing process. For this purpose, five categories of wooden furniture wastes were selected and mixed, after grinding, with raw clay materials. The samples were extruded into green bodies and then fired at 950 °C. The influence of the type and amount of the addition of pore-forming agents (5 or 10 wt. %) on the mechanical properties of the fired samples was studied and compared to values obtained for lightweight bricks. Results showed that the formation of macropores slightly decreased the mechanical strength. The analysis of the chemical composition of the gas released during the firing process was carried out. Results were compared to literature for gases emitted in the manufacturing of porous masonry brick, using sawdust as a pore-forming agent. It was found that the gases released after the combustion of clay incorporating particle board wood wastes (PP) are not higher in content than those from the case of masonry brick using sawdust. Graphical abstract
ISSN:1618-954X
1618-9558
DOI:10.1007/s10098-022-02409-8