Reduction of DC bus capacitor ripple current with PAM/PWM converter

• Main Authors: Kieferndorf, F.D., Forster, M., Lipo, T.A.
• Format: Conference Proceeding
• Language: English
• Subjects: Capacitors; Chemicals; Degradation; Failure analysis; Frequency; Heating; Paramagnetic resonance; Pulse width modulation; Pulse width modulation converters; Variable speed drives
• ISSN: 0197-2618; 2576-702X
• DOI: 10.1109/IAS.2002.1042777

Electrolytic capacitors are used in nearly all adjustable speed drives (ASD) and they are one of the components most prone to failure. The main failure mechanisms include the loss of electrolyte through outgassing and chemical changes to the oxide layer. All the degradation mechanisms are exacerbated by ripple current heating. Since the equivalent series resistance (ESR) of electrolytic capacitors is a very strong function of frequency, it must be properly modeled to accurately calculate the power loss. In this paper, a method to reduce the ripple current in a constant Volts/Hertz (V/f) pulse amplitude modulation (PAM/PWM) converter driving an induction motor is investigated. The DC bus voltage amplitude is reduced in proportion to speed by a buck or current source rectifier (CSR) and the PWM modulation index is increased to achieve a reduced ripple current below base speed. It is shown that this mode of operation can lead to a significant reduction in capacitor power loss leading to increased capacitor lifetime or decreased capacitor size. The capacitor heating is analyzed using numerical and analytical techniques. Experimental results are provided to verify the analytical results.