High frequency magnetic near field measurement on LSI chip using planar multi-layer shielded loop coil

• Main Authors: Masuda, N., Tamaki, N., Kuriyama, T., Jin Ching Bu, Yamaguchi, M., Arai, K.
• Format: Conference Proceeding
• Language: eng ; jpn
• Subjects: Apertures; Coils; Frequency measurement; Large scale integration; Magnetic circuits; Magnetic field measurement; Magnetic shielding; Microstrip; Semiconductor device measurement; Spatial resolution
• DOI: 10.1109/ISEMC.2003.1236568

Magnetic near-field measurements of circuitry are gathering increasing interest as an effective technique for detecting noise emission current sources. Against this background, we developed planar thick-film multi-layer shielded loop coils with loop apertures of 20 /spl mu/m x 1000 /spl mu/m and 600 /spl mu/m x 600 /spl mu/m. The shielded-loop structure's main feature is the cancellation of voltage induced by the electric field. A 60-/spl mu/m wide microstrip line was used as the device under test (DUT). In a spatial resolution test conducted at 1GHz, we obtained optimum spatial resolution of 90 /spl mu/m at the 6 dB degrading point for a rectangular coil with a 20/spl mu/m x 1000 /spl mu/m aperture. This resolution level is 2.8 times better than that we obtained with our previous product comprising a low temperature co-fired ceramic (LTCC) board, because with the new coils we were able to successfully reduce the mean distance between the loop and the DUT. In measuring nonuniform magnetic field distribution near the 1.58 mm-wide microstrip line and the internal chip of a large-scale integrated (LSI) circuit, we found the new model could measure a finer distribution than our previous probe.