Optimization of flexible substrate for COF (chip on flexible) LED packaging

The poor thermal design of high brightness light-emitting diodes (HB-LEDs) package for the automotive exterior lighting system causes the degradation of the optical and reliability performance, also the deterioration of the cost-effectiveness. We design the flexible package substrate with the thick...

Full description

Saved in:
Bibliographic Details
Main Authors: Young-Woo Kim, Sung-Mo Park, Min-Sung Kim, Jae-Pil Kim, Jae-Bum Kim, Sang-Bin Song, Yeong-Seog Lim
Format: Conference Proceeding
Language:English
Subjects:
Automotive engineering
Brightness
Circuit testing
Flexible printed circuits
Infrared heating
Light emitting diodes
Optical design
Packaging
Thermal degradation
Thermal resistance
Online Access:Request full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:The poor thermal design of high brightness light-emitting diodes (HB-LEDs) package for the automotive exterior lighting system causes the degradation of the optical and reliability performance, also the deterioration of the cost-effectiveness. We design the flexible package substrate with the thick heat-spreading layer and thermal via-hole fully filled with the copper (FFC) for the conventional process of flexible printed circuit board (FPCB) and the extraction methodology of the heat flow is presented. Effective heat flow for thermal simulation is compensated for the optical loss between the internal and external quantum efficiency. The vertical blue LED is attached on metal core printed circuit board (MCPCB) without the molding process, and then heat distribution and optical power is, respectively, measured by using infrared camera and optical LED tester as increasing the magnitude of the input power. Detailed thermal performance of FPCB and MCPCB is verified with the heat distribution and the thermal resistance. The effects of the main factors of FPCB with filled via-holes are discussed using design of experiment (DOE) methodology. The thermal resistance and junction temperature of FPCB is, respectively, over two times and 10 degC lower than that of MCPCB.
ISSN:0569-5503
2377-5726
DOI:10.1109/ECTC.2009.5074288