A 55dB SNR with 240Hz frame scan rate mutual capacitor 30×24 touch-screen panel read-out IC using code-division multiple sensing technique

• Main Authors: Hyungcheol Shin, Seunghoon Ko, Hongjae Jang, Ilhyun Yun, Kwyro Lee
• Format: Conference Proceeding
• Language: English
• Subjects: Electrodes; Noise measurement; Sensors; Signal to noise ratio; Switched-mode power supply; Timing
• ISSN: 0193-6530; 2376-8606
• DOI: 10.1109/ISSCC.2013.6487782

Capacitive touch-screen technology introduces new concepts to user interfaces, such as multi-touch, pinch zoom-in/out gestures, thus expanding the smartphone market. However, capacitive touch-screen technology still suffers from performance degradation like a low frame scan rate and poor accuracy, etc. One of the key performance factors is the immunity to external noise, which intrudes randomly into the touch-screen system. HUM, display noise, and SMPS are such noise sources. The main electrical power source produces HUM, one of the most important sources of noise, which has a 50 or 60Hz component. Display noise is emitted when an LCD or OLED is driven by the internal timing controller, which generates the driving signal in the tens of kHz range. The touch performance of On-Cell or In-Cell touch displays is seriously affected by this kind of noise, because the distance between the display pixel layer and the capacitive touchscreen panel is getting smaller. SMPS is another noise source that ranges up to 300kHz. The charger for a smart-phone, the USB port in a computer, a tri-phosphor fluorescent light bulb are all examples of sources of SMPS. There have been many attempts to remove such noise. Amplitude modulation with frequency hopping is proposed in [1]. However, when the noise environment changes, this method needs recalibration, resulting in non-constant touch response time. Another method tries to filter the noise from the display [2], but it does not remove other noise sources like HUM or SMPS.