Loading…

Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling

In this paper, a textile-based strain sensor has been developed to create a respiration belt. The constituent materials and the knitted structure of the textile sensor have been specifically selected and tailored for this application. Electromechanical modeling has been developed by exploiting Peirc...

Full description

Saved in:
Bibliographic Details
Published in:IEEE sensors journal 2015-01, Vol.15 (1), p.110-122
Main Authors: Atalay, Ozgur, Kennon, William Richard, Demirok, Erhan
Format: Article
Language:English
Subjects:
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
cited_by cdi_FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33
cites cdi_FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33
container_end_page 122
container_issue 1
container_start_page 110
container_title IEEE sensors journal
container_volume 15
creator Atalay, Ozgur
Kennon, William Richard
Demirok, Erhan
description In this paper, a textile-based strain sensor has been developed to create a respiration belt. The constituent materials and the knitted structure of the textile sensor have been specifically selected and tailored for this application. Electromechanical modeling has been developed by exploiting Peirce's loop model in order to describe the fabric geometry under static and dynamic conditions. Kirchhoff's node and loop equations have been employed to create a generalized solution for the equivalent electrical resistance of the textile sensor for a given knitted loop geometry and for a specified number of loops. A laboratory test setup was built to characterize the prototype sensor and the resulting equivalent resistance under strain levels up to 40%, and consistent resistance response levels have been obtained from the sensor which correlate well with the modelled data. Production of the respiration belt was realized by bringing together knitted sensor and a relatively inelastic textile strap. Both machine simulations and real-time measurements on a human subject have been performed in order to calculate average breathing frequencies under different static and dynamic conditions. Also, different scenarios have been performed, such as slow breathing and rapid breathing. The sensory belt was located in either the chest area or in the abdominal area during the experimental measurements and the sensor yielded a good response under both static and dynamic conditions. However, body motion artefacts affected the signal quality under dynamic conditions and an additional signal-processing step was added to eliminate unwanted interference from the breathing signal.
doi_str_mv 10.1109/JSEN.2014.2339739
format article
fullrecord <record><control><sourceid>crossref_ieee_</sourceid><recordid>TN_cdi_ieee_primary_6857365</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>6857365</ieee_id><sourcerecordid>10_1109_JSEN_2014_2339739</sourcerecordid><originalsourceid>FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33</originalsourceid><addsrcrecordid>eNo9kE1OwzAQRi0EEqVwAMTGF3Cx4794iaoChRakBgQrIuOMISgkle1Nb4-jVixGM6OZ9y0eQpeMzhij5vqhWjzNCsrErODcaG6O0IRJWRKmRXk8zpwSwfX7KTqL8YdSZrTUE_TxBj6Rx75NCRpcpWDbHlfQxyFgn2s95NMQ2v4LbyBu22DztsMbmwDbvsHLFPGiA5fCQNbgvm3fOttlrIEuQ-foxNsuwsWhT9Hr7eJlfk9Wz3fL-c2KOM5ZIrwpFHOWgpICrFKeWipMSakuNf1UTJvCMC-NL7g3YBqpJbeFcM5Tx0TOmCK2z3VhiDGAr7eh_bVhVzNaj4LqUVA9CqoPgjJztWdaAPj_V6XUXEn-BxC1Yjg</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling</title><source>IEEE Xplore (Online service)</source><creator>Atalay, Ozgur ; Kennon, William Richard ; Demirok, Erhan</creator><creatorcontrib>Atalay, Ozgur ; Kennon, William Richard ; Demirok, Erhan</creatorcontrib><description>In this paper, a textile-based strain sensor has been developed to create a respiration belt. The constituent materials and the knitted structure of the textile sensor have been specifically selected and tailored for this application. Electromechanical modeling has been developed by exploiting Peirce's loop model in order to describe the fabric geometry under static and dynamic conditions. Kirchhoff's node and loop equations have been employed to create a generalized solution for the equivalent electrical resistance of the textile sensor for a given knitted loop geometry and for a specified number of loops. A laboratory test setup was built to characterize the prototype sensor and the resulting equivalent resistance under strain levels up to 40%, and consistent resistance response levels have been obtained from the sensor which correlate well with the modelled data. Production of the respiration belt was realized by bringing together knitted sensor and a relatively inelastic textile strap. Both machine simulations and real-time measurements on a human subject have been performed in order to calculate average breathing frequencies under different static and dynamic conditions. Also, different scenarios have been performed, such as slow breathing and rapid breathing. The sensory belt was located in either the chest area or in the abdominal area during the experimental measurements and the sensor yielded a good response under both static and dynamic conditions. However, body motion artefacts affected the signal quality under dynamic conditions and an additional signal-processing step was added to eliminate unwanted interference from the breathing signal.</description><identifier>ISSN: 1530-437X</identifier><identifier>EISSN: 1558-1748</identifier><identifier>DOI: 10.1109/JSEN.2014.2339739</identifier><identifier>CODEN: ISJEAZ</identifier><language>eng</language><publisher>IEEE</publisher><subject>Contacts ; Fabrics ; Monitoring ; Resistance ; Sensors ; Strain ; Yarn</subject><ispartof>IEEE sensors journal, 2015-01, Vol.15 (1), p.110-122</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33</citedby><cites>FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33</cites><orcidid>0000-0002-1975-2830</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/6857365$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>314,780,784,27924,27925,54796</link.rule.ids></links><search><creatorcontrib>Atalay, Ozgur</creatorcontrib><creatorcontrib>Kennon, William Richard</creatorcontrib><creatorcontrib>Demirok, Erhan</creatorcontrib><title>Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling</title><title>IEEE sensors journal</title><addtitle>JSEN</addtitle><description>In this paper, a textile-based strain sensor has been developed to create a respiration belt. The constituent materials and the knitted structure of the textile sensor have been specifically selected and tailored for this application. Electromechanical modeling has been developed by exploiting Peirce's loop model in order to describe the fabric geometry under static and dynamic conditions. Kirchhoff's node and loop equations have been employed to create a generalized solution for the equivalent electrical resistance of the textile sensor for a given knitted loop geometry and for a specified number of loops. A laboratory test setup was built to characterize the prototype sensor and the resulting equivalent resistance under strain levels up to 40%, and consistent resistance response levels have been obtained from the sensor which correlate well with the modelled data. Production of the respiration belt was realized by bringing together knitted sensor and a relatively inelastic textile strap. Both machine simulations and real-time measurements on a human subject have been performed in order to calculate average breathing frequencies under different static and dynamic conditions. Also, different scenarios have been performed, such as slow breathing and rapid breathing. The sensory belt was located in either the chest area or in the abdominal area during the experimental measurements and the sensor yielded a good response under both static and dynamic conditions. However, body motion artefacts affected the signal quality under dynamic conditions and an additional signal-processing step was added to eliminate unwanted interference from the breathing signal.</description><subject>Contacts</subject><subject>Fabrics</subject><subject>Monitoring</subject><subject>Resistance</subject><subject>Sensors</subject><subject>Strain</subject><subject>Yarn</subject><issn>1530-437X</issn><issn>1558-1748</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2015</creationdate><recordtype>article</recordtype><recordid>eNo9kE1OwzAQRi0EEqVwAMTGF3Cx4794iaoChRakBgQrIuOMISgkle1Nb4-jVixGM6OZ9y0eQpeMzhij5vqhWjzNCsrErODcaG6O0IRJWRKmRXk8zpwSwfX7KTqL8YdSZrTUE_TxBj6Rx75NCRpcpWDbHlfQxyFgn2s95NMQ2v4LbyBu22DztsMbmwDbvsHLFPGiA5fCQNbgvm3fOttlrIEuQ-foxNsuwsWhT9Hr7eJlfk9Wz3fL-c2KOM5ZIrwpFHOWgpICrFKeWipMSakuNf1UTJvCMC-NL7g3YBqpJbeFcM5Tx0TOmCK2z3VhiDGAr7eh_bVhVzNaj4LqUVA9CqoPgjJztWdaAPj_V6XUXEn-BxC1Yjg</recordid><startdate>201501</startdate><enddate>201501</enddate><creator>Atalay, Ozgur</creator><creator>Kennon, William Richard</creator><creator>Demirok, Erhan</creator><general>IEEE</general><scope>97E</scope><scope>RIA</scope><scope>RIE</scope><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0002-1975-2830</orcidid></search><sort><creationdate>201501</creationdate><title>Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling</title><author>Atalay, Ozgur ; Kennon, William Richard ; Demirok, Erhan</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2015</creationdate><topic>Contacts</topic><topic>Fabrics</topic><topic>Monitoring</topic><topic>Resistance</topic><topic>Sensors</topic><topic>Strain</topic><topic>Yarn</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Atalay, Ozgur</creatorcontrib><creatorcontrib>Kennon, William Richard</creatorcontrib><creatorcontrib>Demirok, Erhan</creatorcontrib><collection>IEEE All-Society Periodicals Package (ASPP) 2005-present</collection><collection>IEEE All-Society Periodicals Package (ASPP) 1998-Present</collection><collection>IEEE Xplore</collection><collection>CrossRef</collection><jtitle>IEEE sensors journal</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Atalay, Ozgur</au><au>Kennon, William Richard</au><au>Demirok, Erhan</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling</atitle><jtitle>IEEE sensors journal</jtitle><stitle>JSEN</stitle><date>2015-01</date><risdate>2015</risdate><volume>15</volume><issue>1</issue><spage>110</spage><epage>122</epage><pages>110-122</pages><issn>1530-437X</issn><eissn>1558-1748</eissn><coden>ISJEAZ</coden><abstract>In this paper, a textile-based strain sensor has been developed to create a respiration belt. The constituent materials and the knitted structure of the textile sensor have been specifically selected and tailored for this application. Electromechanical modeling has been developed by exploiting Peirce's loop model in order to describe the fabric geometry under static and dynamic conditions. Kirchhoff's node and loop equations have been employed to create a generalized solution for the equivalent electrical resistance of the textile sensor for a given knitted loop geometry and for a specified number of loops. A laboratory test setup was built to characterize the prototype sensor and the resulting equivalent resistance under strain levels up to 40%, and consistent resistance response levels have been obtained from the sensor which correlate well with the modelled data. Production of the respiration belt was realized by bringing together knitted sensor and a relatively inelastic textile strap. Both machine simulations and real-time measurements on a human subject have been performed in order to calculate average breathing frequencies under different static and dynamic conditions. Also, different scenarios have been performed, such as slow breathing and rapid breathing. The sensory belt was located in either the chest area or in the abdominal area during the experimental measurements and the sensor yielded a good response under both static and dynamic conditions. However, body motion artefacts affected the signal quality under dynamic conditions and an additional signal-processing step was added to eliminate unwanted interference from the breathing signal.</abstract><pub>IEEE</pub><doi>10.1109/JSEN.2014.2339739</doi><tpages>13</tpages><orcidid>https://orcid.org/0000-0002-1975-2830</orcidid></addata></record>
fulltext fulltext
identifier ISSN: 1530-437X
ispartof IEEE sensors journal, 2015-01, Vol.15 (1), p.110-122
issn 1530-437X
1558-1748
language eng
recordid cdi_ieee_primary_6857365
source IEEE Xplore (Online service)
subjects Contacts
Fabrics
Monitoring
Resistance
Sensors
Strain
Yarn
title Weft-Knitted Strain Sensor for Monitoring Respiratory Rate and Its Electro-Mechanical Modeling
url http://sfxeu10.hosted.exlibrisgroup.com/loughborough?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-29T04%3A45%3A16IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-crossref_ieee_&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Weft-Knitted%20Strain%20Sensor%20for%20Monitoring%20Respiratory%20Rate%20and%20Its%20Electro-Mechanical%20Modeling&rft.jtitle=IEEE%20sensors%20journal&rft.au=Atalay,%20Ozgur&rft.date=2015-01&rft.volume=15&rft.issue=1&rft.spage=110&rft.epage=122&rft.pages=110-122&rft.issn=1530-437X&rft.eissn=1558-1748&rft.coden=ISJEAZ&rft_id=info:doi/10.1109/JSEN.2014.2339739&rft_dat=%3Ccrossref_ieee_%3E10_1109_JSEN_2014_2339739%3C/crossref_ieee_%3E%3Cgrp_id%3Ecdi_FETCH-LOGICAL-c331t-3d261ca0e654ea66f0a0498007870b6179291f59f23f9e9d5753a24ccf0c14c33%3C/grp_id%3E%3Coa%3E%3C/oa%3E%3Curl%3E%3C/url%3E&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=6857365&rfr_iscdi=true