Multichannel Capacitive Imaging of Gas Vortex in Swirling Two-Phase Flows using Parametric Reconstruction

• Published in: IEEE access 2020-01, Vol.8, p.1-1
• Main Authors: Sattar, Muhammad Awais, Wrasse, Aluisio do N., Morales, Rigoberto E.M., Pipa, Daniel Rodrigues, Banasiak, Robert, Da Silva, Marco J., Babout, Laurent
• Format: Article
• Language: English
• Subjects: Capacitive Sensor; Data acquisition; Diameters; Electrodes; Flow velocity; Fluid dynamics; Fluid flow; Gas separation; Grid Search; High speed cameras; Image reconstruction; Liquid flow; Parameter Extraction; Parameters; Particle separators; Permittivity; Permittivity measurement; Phase separation; Qualitative analysis; Receivers; Swirling; Swirling Two-Phase Flows; Temporal resolution; Two phase flow; Vortices
• ISSN: 2169-3536; 2169-3536
• DOI: 10.1109/ACCESS.2020.2986724

Swirl-based inline phase separation is a promising approach in the process industry with potential application in oil and gas separation in petroleum industry. To increase the efficiency of the separation, the process may be controlled. In this direction, the position and the diameter of the gas vortex are two parameters that can be used in the control loop, provided that they can be non-intrusively estimated. This article presents a capacitive sensor-based imaging method to extract these geometrical parameters. The proposed method consists in obtaining high-temporal resolution capacitance measurements at the pipe boundary of a test rig, which in turn are used in a reconstruction and extracting the targeted parameters of the gas vortex. The calculated parameters are then used to visually present the swirling flow. The measurement system was evaluated quantitatively by performing experiments with different phantoms of known diameters and positions in the sensing area. Dynamic measurements were also performed in a test rig for liquid-gas swirling flow. The capacitive imaging system is capable of detecting characteristics of the flow for a wide range of gas and liquid flow rates. A qualitative analysis was also carried out by comparing time series of the capacitive images with high-speed camera recording. The geometrical parameters obtained by the proposed approach presents a good agreement with the real data, with a root mean square deviation of 0.76mm for diameter and 0.88mm for vortex position. It can be utilized in future work as an alternative or complementary input for the controlled inline liquid-gas separation system.