30.1 A 176-Stacked 512Gb 3b/Cell 3D-NAND Flash with 10.8Gb/mm2 Density with a Peripheral Circuit Under Cell Array Architecture

• Main Authors: Park, Jae-Woo, Kim, Doogon, Ok, Sunghwa, Park, Jaebeom, Kwon, Taeheui, Lee, Hyunsoo, Lim, Sungmook, Jung, Sun-Young, Choi, Hyeongjin, Kang, Taikyu, Park, Gwan, Yang, Chul-Woo, Choi, Jeong-Gil, Ko, Gwihan, Shin, Jaehyeon, Yang, Ingon, Nam, Junghoon, Sohn, Hyeokchan, Hong, Seok-In, Jeong, Yohan, Choi, Sung-Wook, Choi, Changwoon, Shin, Hyun-Soo, Lim, Junyoun, Youn, Dongkyu, Nam, Sanghyuk, Lee, Juyeab, Ahn, Myungkyu, Lee, Hoseok, Lee, Seungpil, Park, Jongmin, Gwon, Kichang, Jeong, Woopyo, Choi, Jungdal, Kim, Jinkook, Jin, Kyo-Won
• Format: Conference Proceeding
• Language: English
• Subjects: Computer architecture; Industries; Microprocessors; Plugs; Solid state circuits; Three-dimensional displays; Two dimensional displays
• ISSN: 2376-8606
• DOI: 10.1109/ISSCC42613.2021.9365809

With an explosive growth of data generated by various applications, one of the most important topics of the current era is to increase the storage capacity. The evolution from 2D planar NAND to 3D NAND enables the development of high-density storage by increasing the number of stacked word-lines (WLs) in a smaller footprint. The industry has moved beyond 96-stacked-WL and achieved a 128-stacked 3D NAND. A 128-stacked 3b/cell 3D NAND with a density of 7.8Gb/mm 2 was reported recently, based on a peripheral circuit under cell array (PUC) structure [1]. Nevertheless, due to the constant demand for increased density, 3D NAND faces the following challenges [2,3]: (1) a reduced PUC area due to an increasing WL stack, (2) increased load due to a higher number of stacks and a reduced spacing between WLs, (3) rising WL-channel capacitance due to an increasing number of strings, and (4) variation in the RC delay between WLs due to the non-uniformity of plug critical dimension (CD). Not only do these problems limit the density improvement of 3D NAND, but they also increase the WL rise time, which degrades read and write performance. This paper proposes the following techniques to overcome these challenges: (1) a 12-stage page buffer (PB) with one-to-one (1:1) PBUS(PB to cache connection bus), (2) a variable stage and frequency charge pump with a boosted local pump, (3) center X-decoder (XDEC) and half-plane activation, (4) an unselected string boosting scheme, and (5) adaptive WL overdrive (OVD). By applying these techniques, we achieved a density of 10.8Gb/mm 2 in a 176stacked 3D NAND using 3b/cell.