Numerical simulation on dynamic behaviors of bubbles flowing through bifurcate T-junction in microfluidic deviceProject supported by the National Natural Science Foundation of China (Grant Nos. 51706194 and 51876184)

• Published in: Chinese physics B 2019-09, Vol.28 (10)
• Main Authors: Wu, Liang-Yu, Liu, Ling-Bo, Han, Xiao-Tian, Li, Qian-Wen, Yang, Wei-Bo
• Format: Article
• Language: English
• Subjects: bubble break-up; microfluidic; numerical simulation; T-junction
• ISSN: 1674-1056
• DOI: 10.1088/1674-1056/ab3f27

Based on the volume of fluid (VOF) method, a numerical model of bubbles splitting in a microfluidic device with T-junction is developed and solved numerically. Various flow patterns are distinguished and the effects of bubble length, capillary number, and diameter ratio between the mother channel and branch are discussed. The break-up mechanism is explored in particular. The results indicate that the behaviors of the bubbles can be classified into two categories: break-up and non-break. Under the condition of slug flowing, the branches are obstructed by the bubbles that the pressure difference drives the bubbles into break-up state, while the bubbles that retain non-break state flow into an arbitrary branch under bubbling flow condition. The break-up of the short bubbles only occurs when the viscous force from the continuous phase overcomes the interfacial tension. The behavior of the bubbles transits from non-break to break-up with the increase of capillary number. In addition, the increasing of the diameter ratio is beneficial to the symmetrical break-up of the bubbles.