Design improvement of an airbox for a passenger vehicle

• Published in: Journal of physics. Conference series 2021-12, Vol.2120 (1), p.12010
• Main Authors: Tan, J, Abu Bakar, N Z
• Format: Article
• Language: English
• ISSN: 1742-6588; 1742-6596
• DOI: 10.1088/1742-6596/2120/1/012010

The purpose of an airbox is to provide the engine with a clean air flow for combustion. The high velocity of the fluid flow across the airbox will create a pressure drop resulting a decline in the vehicle’s performance. This project collaborates with an Original Equipment Manufacturer (OEM) to develop a numerical simulation model for a new airbox design and to compare its pressure drop with OEM production design. Reducing the pressure drop across the airbox can increase the efficiency of a vehicle, hence, reducing CO 2 emissions. This research focuses on the passenger type vehicle as it is the highest source of carbon dioxide (CO2) being emitted for road transportation and these pollutant emissions have also caused many health problems on human. ANSYS Fluent program was used to carry out Computational Fluid Dynamics (CFD) simulation for both OEM and the new design. Then, the same simulation setup was used for the new design. The inlet size of the new design is larger when compared to the OEM design. After analysing both models, it was determined that the main reason behind the pressure loss was caused by the shape of the airbox and turbulent flow inside. The new airbox design shows reduction of 96% in the pressure drop within it and in return, enhancing the performance of the passenger vehicle. This conclude that numerical simulation model is able to provide a good indicator for the designer to choose the best design and proceed with fabrication and conduct actual test, thus saving a lot of prototyping and repeated testing cost.