Magnetic-abrasive finishing with new diffusion-alloyed materials based on dispersed metal waste

• Published in: Journal of physics. Conference series 2021-12, Vol.2131 (4), p.42017
• Main Authors: Panteleenko, F, Petrishin, G, Panteleenko, E
• Format: Article
• Language: English
• ISSN: 1742-6588; 1742-6596
• DOI: 10.1088/1742-6596/2131/4/042017

The article discusses the issues of assessing the effectiveness of the use of new diffusion-alloyed ferromagnetic abrasive materials in the technology of magnetic abrasive finishing. The productivity of processing and the roughness of the processed surface were evaluated as they are considered to be the main performance criteria of ferric-abrasive powders (FAP). There were researched three types of powders: common Fe-TiC powder, obtained by the sintering (as a reference), and two new diffusion alloyed (borated and nitrocarburized) FAP, made of low-carbon finely dispersed ferrum-based wastes. Both new proposed diffusion-alloyed powders have better cutting characteristics then reference powder, explained by the structure features and their properties. Evaluation of productivity and roughness of surface shows, that there is their direct dependence of morphology, hardness and fragility of powder particles. The best cutting characteristics has borated powders, as they have microhardness 18,000-20,000 MPa and the tendency to brittle fracture, that leads to the new less-sized particles with sharp cutting edges creation.