Bench tests of the friction drive of the vertical spindle made of poly-V belts for improving cotton harvesters

• Published in: IOP conference series. Earth and environmental science 2022-08, Vol.1076 (1), p.12007
• Main Authors: Shoumarova, M, Abdillayev, T, Yusupov, Sh A
• Format: Article
• Language: English
• Subjects: Belt drives; Cotton; Friction; Friction drives; Harvesters; Harvesting; Rollers; Spindles; V-belts
• ISSN: 1755-1307; 1755-1315
• DOI: 10.1088/1755-1315/1076/1/012007

The article reports that in order to improve the functional characteristics of the friction drive of vertical spindles, it was proposed to replace its conventional V-belts with poly-V-belts. Therefore, rollers with changed parameters are installed on the spindles, while maintaining the magnitude of the rolling radius of serial rollers. To determine the functionality of the new drive, a stand with a single spindle drum was created, which allows you to determine all the performance indicators of the polyline drive. The main task of research on this stand was to determine the possibility of creating a traction (friction) force of the drive that always exceeds the resistance force of a cotton bush clamped in a narrow working slot of the harvesting apparatus. To assess the functionality of a new version of the friction drive, a comparison technique was used when at the beginning the friction (thrust) force of a serial roller with a V-belt drive was measured, and then, on the stand-pull force of the drive with a poly-V-belt. A special device was made to measure the pulling force of the belts.