Upset bulging as a preforming operation for hot metal gas forming of 22MnB5 tubes

Hot Metal Gas Forming (HMGF) is a coupled process of gas forming and quenching of tubes. This process allows to obtain complex and accurate geometry due to the elimination of springback and high mechanical properties due to the formation of martensite, as a result, the weight of the parts can be red...

Full description

Saved in:
Bibliographic Details
Published in:IOP conference series. Materials Science and Engineering 2022-05, Vol.1238 (1), p.12016
Main Authors: Alimov, A, Haase, R, Sviridov, A
Format: Article
Language:English
Subjects:
Aerospace industry
Axial stress
Cold upsetting
Deformation
Forming limits
Martensite
Mechanical properties
Preforming
Quench hardenability
Springback
Tubes
Ultimate tensile strength
Workpieces
Yield stress
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:Hot Metal Gas Forming (HMGF) is a coupled process of gas forming and quenching of tubes. This process allows to obtain complex and accurate geometry due to the elimination of springback and high mechanical properties due to the formation of martensite, as a result, the weight of the parts can be reduced. HMGF is widely used in the aerospace and automotive industries to make critical parts from high hardenability steels such as 22MnB5. A typical hot stamped component has 1000 MPa yield stress and 1500 MPa ultimate tensile strength. The main challenge of HMGF process is a significant material thinning and cracking due to the biaxial tension stress state. The paper proposes a preforming method for increasing the forming limits of HMGF by the cold upset bulging of tubes by means of the additional volume of material in the deformation zone. This method allows to obtain one or several waves in the cross section of the tube, which helps to increase the minimum workpiece wall thickness after the forming process by more than 40% and to reduce a probability of the crack formation.
ISSN:1757-8981
1757-899X
DOI:10.1088/1757-899X/1238/1/012016