Active Damping Stability Control Method Based on Voltage Compensation for IPMSM Drives with Small DC-Link Capacitor

• Published in: Journal of electrical engineering & technology 2023, 18(2), , pp.1161-1172
• Main Authors: Song, Jian, Song, Wen-Xiang, Liu, Zhan-Jun, Ma, Shao-Cai
• Format: Article
• Language: English
• Subjects: Electrical Engineering; Electrical Machines and Networks; Electronics and Microelectronics; Engineering; Instrumentation; Original Article; Power Electronics; 전기공학
• ISSN: 1975-0102; 2093-7423
• DOI: 10.1007/s42835-022-01189-x

Aiming at the unstable phenomena such as high DC-link voltage ripple that occur in the interior permanent magnet synchronous motor drive system of the small DC-link capacitor when the rotor speed is high or the load power is large, this paper proposes an active damping control method based on voltage compensation. The method starts from the mathematical model of the driving system, based on the characteristic equation of the driving system, and according to the Rouse stability criterion, the driving system is stabilized by applying a virtual resistance to change the coefficient of the characteristic equation. The proposed method only needs a bandpass filter to extract the DC-link voltage ripple, which is then compensated to the motor stator voltage axis by the damping coefficient. In order to obtain high damping performance, considering the time constant and the delay of the control loop, the theoretical design basis for a reasonable value of the damping coefficient is given, and the influence of the proposed method on the performance of the drive system is evaluated. Simulation and experimental results verify the effectiveness of the proposed method.