Real-time 14N NQR-based sodium nitrite analysis in a noisy field

• Published in: Nuclear engineering and technology 2023, 55(12), , pp.4570-4575
• Main Authors: Sharifi, Mohammad Saleh, Song, Ho Seung, Afarideh, Hossein, Ghergherehchi, Mitra, Simiari, Mehdi
• Format: Article
• Language: English
• Subjects: 14 N NQR; Interference suppression; Nitrogen-contained materials; Noise reduction; Nuclear quadrupole resonance; Radio frequency interference; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2023.08.034

Noise and Radio-frequency interference or RFI causes a significant restriction on the Free induction Decay or FID signal detection of the Nuclear Quadrupole Resonance procedure. Therefore, using this method in non-isolated environments such as industry and ports requires extraordinary measures. For this purpose, noise reduction algorithms and increasing signal-to-noise-and-interference ratio or SNIR have been used. In this research, sodium nitrite has been used as a sample and algorithms have been tested in a non-isolated environment. The resonant frequencies for the 150 g of test sample were measured at 303 K at about 1 MHz and 3.4 MHz. The main novelty in this study was, (1) using two types of antennas in the receiver to improve adaptive noise and interference cancellation, (2) using a separate helical antenna in the transmitter to eliminate the duplexer, (3) estimating the noise before sending the pulse to calculate the weighting factors and reduce the noise by adaptive noise cancellation, (3) reject the interference by blanking algorithm, (4) pulse integration in the frequency domain to increase the SNR, and (5) increasing the detection speed by new pulse integration technique. By interference rejection and noise cancellation, the SNIR is improved to 9.24 dB at 1 MHz and to 7.28 dB at 3.4 MHz, and by pulse integration 44.8 dB FID signal amplification is achieved, and the FID signals are detected at 1.057 MHz and 3.402 MHz at room temperature.