Diameter Measurement of Jet-Grouting Column Using Geo-Electrical Probe: Construction and Field Testing

• Published in: KSCE journal of civil engineering 2024, 28(2), , pp.566-580
• Main Authors: Amini, Abolfazl, Rojhani, Mahdi, Azadi, Asghar, Raoof, Mohammad Amin
• Format: Article
• Language: English
• Subjects: Civil Engineering; Engineering; Geotechnical Engineering; Geotechnical Engineering & Applied Earth Sciences; Industrial Pollution Prevention; 토목공학
• ISSN: 1226-7988; 1976-3808
• DOI: 10.1007/s12205-023-2082-9

Uncertainty about the geometry of jet grouting columns is a serious challenge to the efficiency of jet grouting technology. If this challenge can be met, jet grouting can become an efficient method of soil improvement. One proposed approach is measurement based on changes in the electrical resistivity between the column and surrounding soil. This approach is non-destructive, easy to use, fast and accurate. This paper reviews jet-grouting methods using the experimental research approach and reports on the design and construction of a probe equipped with ring electrodes that is suitable for measurement of the column diameter. The approach is based on the geoelectric method and Wenner theory. The probe was field tested on jet-grouting columns in a project in Bandar-e Gaz. The probe results were validated by visually observing the dimensions of the excavated column. The results showed that the probe performed well. The device measured a 90-cm column as being from 81 to 88 cm with an error of about 10%. The method of measuring the difference in electrical resistance was shown to be an accurate approach to solving the problem of uncertainty in the geometry of jet-grouting columns.