Overview of separate effect and integral system tests on the passive containment cooling system of SMART100

• Published in: Nuclear engineering and technology 2024, 56(3), , pp.1066-1080
• Main Authors: Yang, Jin-Hwa, Ahn, Tae-Hwan, Son, Hong Hyun, Kwon, Jin Su, Bae, Hwang, Park, Hyun-Sik, Kang, Kyoung-Ho
• Format: Article
• Language: English
• Subjects: Condensation; Non-condensable gas; Passive containment cooling system (PCCS); SMART CPRSS integral system test apparutus2 (SISTA2); SMART IRWST Separated test apparatus1 (SISTA1); SMART100; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2024.01.025

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.