Analysis of forced convection in the HTTU experiment using numerical codes

• Published in: Nuclear engineering and technology 2024, 56(3), , pp.959-965
• Main Authors: Potgieter, M.C., du Toit, C.G.
• Format: Article
• Language: English
• Subjects: CFD; Code validation; Forced convection; HTGR; Integral effects test; Pebble bed reactor; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2023.11.041

The High Temperature Test Unit (HTTU) was an experimental set-up to conduct separate and integral effects tests of the Pebble Bed Modular Reactor (PBMR) core. The annular core consisted of a randomly packed bed of uniform spheres. Natural convection tests using both nitrogen and helium, and forced convection tests using nitrogen, were conducted. The maximum material temperature achieved during forced convection testing was 1200 °C. This paper presents the numerical analysis of the flow and temperature distribution for a forced convection test using 3D CFD as well as a 1D systems-CFD computer code. Several modelling approaches are possible, ranging from a fully explicit to a semi-implicit method that relies on correlations of their associated phenomena. For the comparison between codes, the analysis was performed using a porous media approach, where the conduction and radiative heat transfer were lumped together as an effective thermal conductivity and the convective heat transfer was correlated between the solid and gas phases. The results from both codes were validated against the experimental measurements. Favourable results were obtained, in particular by the systems-CFD code with minimal computational and time requirements.