Numerical modeling of hollow-cone fuel atomization, vaporization and wall impingement processes under high ambient temperatures

In the following paper, a numerical study of the atomization, vaporization and wall impingement processes of hollow-cone fuel spray from high-pressure swirl injectors under various ambient temperature conditions was carried out. Also, the availability of applied models and the effect of ambient temp...

Full description

Saved in:
Bibliographic Details
Published in:International journal of automotive technology 2008, 9(3), , pp.267-275
Main Authors: Shim, Y. S., Choi, G. M., Kim, D. J.
Format: Article
Language:English
Subjects:
Automotive Engineering
Energy consumption
Energy efficiency
Engineering
Numerical analysis
Studies
Temperature
Velocity
자동차공학
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In the following paper, a numerical study of the atomization, vaporization and wall impingement processes of hollow-cone fuel spray from high-pressure swirl injectors under various ambient temperature conditions was carried out. Also, the availability of applied models and the effect of ambient temperature on spray characteristics is discussed. The Linearized Instability Sheet Atomization (LISA) model combined with the Aerodynamically Progressed Taylor Analogy Breakup (APTAB) model, the improved Abramzon model and the Gosman model are used to calculate the atomization, vaporization and wall impingement processes of hollow-cone fuel spray, respectively. Spray models are implemented with the modified KIVA code. The calculation results of the spray characteristics under two ambient temperatures, including spray tip penetration, spray structure and radial distance after spray-wall impingement are compared to the experimental results obtained by the Laser Induced Exciplex Fluorescence (LIEF) technique. The droplet size distribution, ambient gas velocity field, vapor phase distribution and fuel film mass generated by spray-wall impingement, measurements which are generally difficult to obtain by experimental methods, are also calculated and discussed. Quantitative discussions on the effect of the ambient temperature on the spray development process are conducted. It is shown that the applied models are applicable even in the high ambient temperature condition.
ISSN:1229-9138
1976-3832
DOI:10.1007/s12239-008-0033-6