Ex-vessel Steam Explosion Analysis for Pressurized Water Reactor and Boiling Water Reactor

• Published in: Nuclear engineering and technology 2016, 48(1), , pp.72-86
• Main Authors: Leskovar, Matjaž, Uršič, Mitja
• Format: Article
• Language: English
• Subjects: Boiling Water Reactor; Fuel-Coolant Interaction; Pressure Load; Pressurized Water Reactor; Reactor Cavity; Severe Accident; Steam Explosion; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2015.08.012

A steam explosion may occur during a severe accident, when the molten core comes into contact with water. The pressurized water reactor and boiling water reactor ex-vessel steam explosion study, which was carried out with the multicomponent three-dimensional Eulerian fuel–coolant interaction code under the conditions of the Organisation for Economic Co-operation and Development (OECD) Steam Explosion Resolution for Nuclear Applications project reactor exercise, is presented and discussed. In reactor calculations, the largest uncertainties in the prediction of the steam explosion strength are expected to be caused by the large uncertainties related to the jet breakup. To obtain some insight into these uncertainties, premixing simulations were performed with both available jet breakup models, i.e., the global and the local models. The simulations revealed that weaker explosions are predicted by the local model, compared to the global model, due to the predicted smaller melt droplet size, resulting in increased melt solidification and increased void buildup, both reducing the explosion strength. Despite the lower active melt mass predicted for the pressurized water reactor case, pressure loads at the cavity walls are typically higher than that for the boiling water reactor case. This is because of the significantly larger boiling water reactor cavity, where the explosion pressure wave originating from the premixture in the center of the cavity has already been significantly weakened on reaching the distant cavity wall.