Validation of spent nuclear fuel decay heat calculation by a two-step method

• Published in: Nuclear engineering and technology 2021, 53(1), , pp.44-60
• Main Authors: Jang, Jaerim, Ebiwonjumi, Bamidele, Kim, Wonkyeong, Park, Jinsu, Choe, Jiwon, Lee, Deokjung
• Format: Article
• Language: English
• Subjects: Back-end cycle; Decay heat; Isotope inventory; Pressurized water reactor; 원자력공학
• ISSN: 1738-5733; 2234-358X
• DOI: 10.1016/j.net.2020.06.028

In this paper, we validate the decay heat calculation capability via a two-step method to analyze spent nuclear fuel (SNF) discharged from pressurized water reactors (PWRs). The calculation method is implemented with a lattice code STREAM and a nodal diffusion code RAST-K. One of the features of this method is the direct consideration of three-dimensional (3D) core simulation conditions with the advantage of a short simulation time. Other features include the prediction of the isotope inventory by Lagrange non-linear interpolation and the use of power history correction factors. The validation is performed with 58 decay heat measurements of 48 fuel assemblies (FAs) discharged from five PWRs operated in Sweden and the United States. These realistic benchmarks cover the discharge burnup range up to 51 GWd/MTU, 23.2 years of cooling time, and spanning an initial uranium enrichment range of 2.100–4.005 wt percent. The SNF analysis capability of STREAM is also employed in the code-to-code comparison. Compared to the measurements, the validation results of the FA calculation with RAST-K are within ±4%, and the pin-wise results are within ±4.3%. This paper successfully demonstrates that the developed decay heat calculation method can perform SNF back-end cycle analyses.