Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures

• Published in: Acta materialia 2016-06, Vol.112 (C), p.40-52
• Main Authors: Otto, F., Dlouhý, A., Pradeep, K.G., Kuběnová, M., Raabe, D., Eggeler, G., George, E.P.
• Format: Article
• Language: English
• Subjects: Aging; Annealing; Grain boundaries; High-entropy alloy; Homogenizing; Inclusions; Phase stability; Phase transformations; Precipitates; Precipitation; Solid solution; Solid solutions; Transmission electron microscopy
• ISSN: 1359-6454; 1873-2453
• DOI: 10.1016/j.actamat.2016.04.005

Among the vast number of multi-principal-element alloys that are referred to as high-entropy alloys (HEAs) in the literature, only a limited number solidify as single-phase solid solutions. The equiatomic HEA, CrMnFeCoNi, is a face-centered cubic (FCC) prototype of this class and has attracted much attention recently because of its interesting mechanical properties. Here we evaluate its phase stability after very long anneals of 500 days at 500–900 °C during which it is reasonable to expect thermodynamic equilibrium to have been established. Microstructural analyses were performed using complementary analysis techniques including scanning and transmission electron microscopy (SEM/TEM/STEM), energy dispersive X-ray (EDX) spectroscopy, selected area electron diffraction (SAD), and atom probe tomography (APT). We show that the alloy is a single-phase solid solution after homogenization for 2 days at 1200 °C and remains in this state after a subsequent anneal at 900 °C for 500 days. However, it is unstable and forms second-phase precipitates at 700 and 500 °C. A Cr-rich σ phase forms at 700 °C, whereas three different phases (L10-NiMn, B2-FeCo and a Cr-rich body-centered cubic, BCC, phase) precipitate at 500 °C. These precipitates are located mostly at grain boundaries, but also form at intragranular inclusions/pores, indicative of heterogeneous nucleation. Since there is limited entropic stabilization of the solid solution state even in the extensively investigated CrMnFeCoNi alloy, the stability of other HEAs currently thought to be solid solutions should be carefully evaluated, especially if they are being considered for applications in vulnerable temperature ranges. [Display omitted]