High Strain Rate Mechanical Characterization of Carbon Fiber Reinforced Polymer Composites Using Digital Image Correlations

• Published in: SAE International Journal of Materials and Manufacturing 2017-05, Vol.10 (2), p.138-146, Article 2017-01-0230
• Main Authors: Powell, Louise A, Luecke, William E, Merzkirch, Matthias, Avery, Katherine, Foecke, Tim
• Format: Article
• Language: English
• Subjects: Automobiles; carbon fiber composites; Carbon fiber reinforced plastics; Carbon fiber reinforcement; Crashworthiness; Deformation; DIC; Digital imaging; Dynamic response; Dynamic testing (Materials); Dynamic tests; elastic modulus; ENGINEERING; Failure mechanisms; Failure modes; Fiber composites; Fiber orientation; Fiber reinforced composites; Fiber reinforced polymers; High speed cameras; High strain rate; Impact strength; Loading rate; Materials; MATERIALS SCIENCE; Measurement; Mechanical analysis; Mechanical properties; Methods; Modulus of elasticity; Molding (process); Polymer matrix composites; Polymers; Strain; Tensile strength; tensile testing; Testing; unidirectional; weave; Woven composites
• ISSN: 1946-3979; 1946-3987; 1946-3987
• DOI: 10.4271/2017-01-0230

The introduction of carbon fiber reinforced polymer (CFRP) composites to structural components in lightweight automotive structures necessitates an assessment to evaluate that their crashworthiness dynamic response provides similar or higher levels of safety compared to conventional metallic structures. In order to develop, integrate and implement predictive computational models for CFRP composites that link the materials design, molding process and final performance requirements to enable optimal design and manufacturing vehicle systems for this study, the dynamic mechanical response of unidirectional (UD) and 2x2 twill weave CRFP composites was characterized at deformation rates applicable to crashworthiness performance. Non-standardized specimen geometries were tested on a standard uniaxial frame and an intermediate-to-high speed dynamic testing frame, equipped with high speed cameras for 3D digital image correlation (DIC). Specimen cross-sections, according to each fiber orientation tested, were consistent across strain rates to ensure results were comparable. Tensile strength and modulus were experimentally investigated over a wide range of strain rates (0.0001 to 200 s-1). DIC was used to estimate strain profiles on composites surfaces, and the modulus was calculated from those strain measurements. Experimental results demonstrated an increase in the tensile strength of UD CFRP composites in the longitudinal (0°) and transverse (90°) direction with increasing strain rates. In contrast, the tensile strength of 2x2 woven composites and the tensile modulus of the UD material were insensitive to increasing strain rates. Comparison of failure modes provided insights on how loading rates influenced failure mechanisms.