Characterization and modelling of the heat transfers in a pilot-scale reactor during composting under forced aeration

• Published in: Waste management (Elmsford) 2012-06, Vol.32 (6), p.1091-1105
• Main Authors: de Guardia, A., Petiot, C., Benoist, J.C., Druilhe, C.
• Format: Article
• Language: English
• Subjects: AERATION; Aeration rate; AMBIENT TEMPERATURE; Applied sciences; CHEMICAL REACTIONS; COMPOST; COMPOSTING; CONSUMPTION RATES; CONVECTION; CONVERSION; ELEMENTS; ENERGY CONVERSION; ENERGY LOSSES; ENERGY TRANSFER; ENTHALPY; Environmental Sciences; EVAPORATION; Exact sciences and technology; FLUIDS; GASES; HEAT LOSSES; HEAT PRODUCTION; HEAT TRANSFER; Heat transfers; Hot Temperature; HYDROGEN COMPOUNDS; INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; LOSSES; MANAGEMENT; MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; MASS TRANSFER; MATTER; Modelling; Models, Theoretical; NONMETALS; ORGANIC MATTER; Organic waste; ORGANIC WASTES; Other wastes and particular components of wastes; OXIDATION; OXYGEN; OXYGEN COMPOUNDS; PHASE TRANSFORMATIONS; PHYSICAL PROPERTIES; Pollution; PROCESSING; SIMULATION; Soil; STOICHIOMETRY; Temperature; THERMODYNAMIC PROPERTIES; VAPORS; WASTE MANAGEMENT; Waste Management - instrumentation; Waste Management - methods; WASTE PROCESSING; WASTES; WATER
• ISSN: 0956-053X; 1879-2456
• DOI: 10.1016/j.wasman.2011.12.028

The paper focused on the modelling of the heat transfers during composting in a pilot-scale reactor under forced aeration. The model took into account the heat production and the transfers by evaporation, convection between material and gas crossing the material, conduction and surface convection between gas and material in bottom and upper parts of the reactor. The model was adjusted thanks to the measurements practised during fifteen composting experiments in which five organic wastes were, each, composted under three constant aeration rates. Heat production was considered proportional to oxygen consumption rate and the enthalpy per mole oxygen consumed was assumed constant. The convective heat transfer coefficients were determined on basis of the continuous measurements of the temperatures of both the lid and the bottom part of the reactor. The model allowed a satisfying prediction of the temperature of the composting material. In most cases, the mean absolute discard between the experimental and the simulated temperatures was inferior to 2.5°C and the peaks of temperature occurred with less than 8h delay. For the half of the experiments the temperature discard between the simulated peak and the experimental one was inferior to 5°C. On basis of the calculation of a stoichiometric production of water through oxidation of the biodegradable organic matter, the simulation of water going out from material as vapour also allowed a rather satisfying prediction of the mass of water in final mixture. The influence of the aeration rate on every type of heat loss was characterized. Finally, the model was used to evaluate the impacts on material temperature caused by the change of the insulation thickness, the ambient temperature, take the lid away, the increase or the decrease of the mass of waste to compost.