A technique for verifying the input response function of neutron time-of-flight scintillation detectors using cosmic rays

An accurate interpretation of DD or DT fusion neutron time-of-flight (nTOF) signals from current mode detectors employed at the Z-facility at Sandia National Laboratories requires that the instrument response functions (IRF's) be deconvolved from the measured nTOF signals. A calibration facilit...

Full description

Saved in:
Bibliographic Details
Published in:Review of scientific instruments 2014-11, Vol.85 (11), p.11D633-11D633
Main Authors: Bonura, M A, Ruiz, C L, Fehl, D L, Cooper, G W, Chandler, G, Hahn, K D, Nelson, A J, Styron, J D, Torres, J A
Format: Article
Language:English
Subjects:
BREMSSTRAHLUNG
CALIBRATION
COSMIC RADIATION
COUNTING RATES
INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY
LINEAR ACCELERATORS
NEUTRON DETECTORS
PHOTOMULTIPLIERS
PULSES
RESPONSE FUNCTIONS
SANDIA NATIONAL LABORATORIES
SCINTILLATION COUNTERS
TIME-OF-FLIGHT METHOD
Citations: Items that this one cites
Items that cite this one
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:An accurate interpretation of DD or DT fusion neutron time-of-flight (nTOF) signals from current mode detectors employed at the Z-facility at Sandia National Laboratories requires that the instrument response functions (IRF's) be deconvolved from the measured nTOF signals. A calibration facility that produces detectable sub-ns radiation pulses is typically used to measure the IRF of such detectors. This work, however, reports on a simple method that utilizes cosmic radiation to measure the IRF of nTOF detectors, operated in pulse-counting mode. The characterizing metrics reported here are the throughput delay and full-width-at-half-maximum. This simple approach yields consistent IRF results with the same detectors calibrated in 2007 at a LINAC bremsstrahlung accelerator (Idaho State University). In particular, the IRF metrics from these two approaches and their dependence on the photomultipliers bias agree to within a few per cent. This information may thus be used to verify if the IRF for a given nTOF detector employed at Z has changed since its original current-mode calibration and warrants re-measurement.
ISSN:0034-6748
1089-7623
DOI:10.1063/1.4896958