High field electron paramagnetic resonance spectroscopy under ultrahigh vacuum conditions--a multipurpose machine to study paramagnetic species on well defined single crystal surfaces

• Published in: Review of scientific instruments 2014-08, Vol.85 (8), p.083903-083903
• Main Authors: Rocker, J, Cornu, D, Kieseritzky, E, Seiler, A, Bondarchuk, O, Hänsel-Ziegler, W, Risse, T, Freund, H-J
• Format: Article
• Language: English
• Subjects: ABSORPTION SPECTROSCOPY; AUGER ELECTRON SPECTROSCOPY; Auger spectroscopy; Catalysis; CATALYSTS; Crystal growth; Crystal surfaces; DENSITY; DESORPTION; ELECTRON DIFFRACTION; Electron paramagnetic resonance; ELECTRON SPIN RESONANCE; Electrons; Epitaxial growth; EPR SPECTROMETERS; FABRY-PEROT INTERFEROMETER; GHZ RANGE 01-100; Infrared reflection; INFRARED SPECTROMETERS; Liquid helium; Low energy electron diffraction; MAGNESIUM OXIDES; MATERIALS SCIENCE; MONOCRYSTALS; Orifices; Oxide coatings; PARAMAGNETISM; PRESSURE RANGE BELOW 1 NANO PA; RESONATORS; SAPPHIRE; SCANNING TUNNELING MICROSCOPY; Scientific apparatus & instruments; Single crystals; Spectrum analysis; Structural analysis; Surface properties; TEMPERATURE RANGE 0065-0273 K; TEMPERATURE RANGE 0273-0400 K; Thin films; Ultrahigh vacuum
• ISSN: 0034-6748; 1089-7623
• DOI: 10.1063/1.4893729

A new ultrahigh vacuum (UHV) electron paramagnetic resonance (EPR) spectrometer operating at 94 GHz to investigate paramagnetic centers on single crystal surfaces is described. It is particularly designed to study paramagnetic centers on well-defined model catalysts using epitaxial thin oxide films grown on metal single crystals. The EPR setup is based on a commercial Bruker E600 spectrometer, which is adapted to ultrahigh vacuum conditions using a home made Fabry Perot resonator. The key idea of the resonator is to use the planar metal single crystal required to grow the single crystalline oxide films as one of the mirrors of the resonator. EPR spectroscopy is solely sensitive to paramagnetic species, which are typically minority species in such a system. Hence, additional experimental characterization tools are required to allow for a comprehensive investigation of the surface. The apparatus includes a preparation chamber hosting equipment, which is required to prepare supported model catalysts. In addition, surface characterization tools such as low energy electron diffraction (LEED)/Auger spectroscopy, temperature programmed desorption (TPD), and infrared reflection absorption spectroscopy (IRAS) are available to characterize the surfaces. A second chamber used to perform EPR spectroscopy at 94 GHz has a room temperature scanning tunneling microscope attached to it, which allows for real space structural characterization. The heart of the UHV adaptation of the EPR experiment is the sealing of the Fabry-Perot resonator against atmosphere. To this end it is possible to use a thin sapphire window glued to the backside of the coupling orifice of the Fabry Perot resonator. With the help of a variety of stabilization measures reducing vibrations as well as thermal drift it is possible to accumulate data for a time span, which is for low temperature measurements only limited by the amount of liquid helium. Test measurements show that the system can detect paramagnetic species with a density of approximately 5 × 10(11) spins/cm(2), which is comparable to the limit obtained for the presently available UHV-EPR spectrometer operating at 10 GHz (X-band). Investigation of electron trapped centers in MgO(001) films shows that the increased resolution offered by the experiments at W-band allows to identify new paramagnetic species, that cannot be differentiated with the currently available methodology.