GIS-based Landslide Hazard Zonation in the Bhagirathi (Ganga) Valley, Himalayas

• Published in: International journal of remote sensing 2002-01, Vol.23 (2), p.357-369
• Main Authors: Saha, A. K., Gupta, R. P., Arora, M. K.
• Format: Article
• Language: English
• Subjects: Applied geophysics; Earth sciences; Earth, ocean, space; Engineering and environment geology. Geothermics; Exact sciences and technology; Internal geophysics; Natural hazards: prediction, damages, etc
• ISSN: 0143-1161; 1366-5901
• DOI: 10.1080/01431160010014260

Landslides cause widespread damage in the Himalayas. Landslide Hazard Zonation is important to take quick and safe mitigation measures and make strategic planning for the future. A part of the Bhagirathi Valley in the Garhwal Himalaya was selected for landslide hazard zonation. The study utilized different types of data including Survey of India topographic maps, geological (lithological and structural) maps, IRS-1B and-1D multispectral and PAN satellite sensor data and field observations. The processing of multi-geodatasets was carried out in a raster GIS environment. The various data layers generated and co-registered were: landuse/landcover, buffer map of thrusts, buffer map of photo-lineaments, lithology, buffer map of drainage, slope angle and relative relief. Data integration was carried out using the ordinal scale (qualitative) relative weighting rating technique to give a Landslide Hazard Index (LHI) value. The breaks in the LHI frequency diagram were used to delineate various landslide hazard zones, namely, very low, low, moderate, high and very high. Field data on landslides were employed to evaluate and validate landslide hazard zonation map. It is interpreted that the distribution of landslides is largely governed by a combination of geoenvironmental conditions like proximity (>500 m) to the thrust zone, presence of Munsiari Formation (Higher Himalayan Crystalline) and barren or less-vegetated areas.